SpringerOpen Newsletter

Receive periodic news and updates relating to SpringerOpen.

Open Access Nano Express

Electrically facilitated translocation of protein through solid nanopore

Lingzhi Wu12, Hang Liu1, Wenyuan Zhao1, Lei Wang1, Chuanrong Hou1, Quanjun Liu1* and Zuhong Lu1*

Author Affiliations

1 State Key Laboratory of Bioelectronics, Southeast University, Nanjing 210096, China

2 School of Geography and Biological Information, Nanjing University of Posts and Telecommunications, Nanjing 210046, China

For all author emails, please log on.

Nanoscale Research Letters 2014, 9:140  doi:10.1186/1556-276X-9-140


The electronic version of this article is the complete one and can be found online at: http://www.nanoscalereslett.com/content/9/1/140


Received:16 February 2014
Accepted:14 March 2014
Published:24 March 2014

© 2014 Wu et al.; licensee Springer.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited.

Abstract

Nanopores have been proven as versatile single-molecule sensors for individual unlabeled biopolymer detection and characterization. In the present work, a relative large nanopore with a diameter of about 60 nm has been used to detect protein translocation driven by a series of applied voltages. Compared with previous studied small nanopores, a distinct profile of protein translocation through a larger nanopore has been characterized. First, a higher threshold voltage is required to drive proteins into the large nanopore. With the increase of voltages, the capture frequency of protein into the nanopore has been markedly enhanced. And the distribution of current blockage events is characterized as a function of biased voltages. Due to the large dimension of the nanopore, the adsorption and desorption phenomenon of proteins observed with a prolonged dwell time has been weakened in our work. Nevertheless, the protein can still be stretched into an unfolded state by increased electric forces at high voltages. In consideration of the high throughput of the large nanopore, a couple of proteins passing through the nanopore simultaneously occur at high voltage. As a new feature, the feasibility and specificity of a nanopore with distinct geometry have been demonstrated for sensing protein translocation, which broadly expand the application of nanopore devices.

Keywords:
Protein translocation; Solid state nanopore; Current blockage; Translocation time

Background

Over past decades, nanopores have been widely evolved in various devices for investigating unlabeled biopolymers at the single-molecule level [1,2]. Although the focus is on nucleic acids, proteins are becoming a prime target for investigation [3,4]. Protein transport through the cellular compartments is a very important physiological process for substance and energy metabolism of living cells [5-7]. Compared with DNA sequencing, protein translocation through nanopores is more challenging. First, proteins have a variety of charge profiles depending on the solvent environment. When pH is lower than the isoelectric point of proteins, the net charge of protein is positive, while the reverse case is negatively charged [8,9]. Second, each protein has a unique structural architecture, including the primary peptide chain, secondary, tertiary, and quaternary structures, which are responsible for their biological functions. Yet the native protein conformation is only marginally stable. Once the protein’s physical and chemical environment is modestly changed, the rigid structure of a protein will unfold into random coils [8,10]. These features of proteins are distinct from the linear DNA with a uniform negative charge. Thus, nanopore experiments on proteins are more complicated than the DNA sequencing.

Yet for all that, a set of experiments have demonstrated the unique and advantageous ability of nanopores to discriminate protein translocations [9-14], protein folding [10,13,15-18], and enzymatic kinetic reactions [19-26] in the context of single-molecule analysis. For example, nanopores have been used to discriminate the surface charge and size of proteins as a function of pH [27-29]. The unfolding transition and structural stability of proteins have also been studied by chemical and thermal denaturation, as well as electric field stretching [3,10,13,15,30]. An interesting phenomenon is non-specific adsorption interaction between proteins and nanopores, whereby the protein sticks to the pore for a prolonged dwell time [18,31,32]. These results closely depend on the quality and geometry of the nanopores used, most of which focus on the small nanopores with the dimension comparable to the analyzers to achieve an optimal solution. Even so, the capture rate of proteins is low in nanopore experiments, and the electroosmotic flow against electrophoretic mobilities of proteins through silicon nitride membranes is dominant in small nanopores [9,10,18,27,33,34]. Meanwhile, the adsorption interaction of proteins easily makes the small pore plugged [31,32]. Therefore, to reduce these negative effects, nanopores with a larger scale are an alternative choice to analyze the varied targets. First, the arriving probability of protein in pore mouth is governed by free diffusion in bulk, which is referred to the pore geometry [9,35]. A higher capture rate is expected for large nanopores [35]. And both electroosmotic effect and protein-pore interaction corresponding to the electric double layer along the charged inner wall will be weakened in large nanopores; thus, more proteins will freely pass through nanopores [36,37]. Additionally, more space in large nanopores is in favor of the surface modification to change the physical and chemical properties of pores [38,39], which will broadly expand the utility of nanopores for biological sensing. Certainly, the signal-to-noise ratio of the blockade current will inevitably deteriorate if the pore is too large. Hence, the choice of nanopore with a suitable dimension is critical for the design of nanopore devices to understand the physical mechanism of molecules translocating through nanopores.

Herein, bovine serum albumin (BSA), an important transport protein, is chosen to pass through a silicon nitride nanopore with a diameter of 60 nm. By applying a set of biased voltages, the protein swims through the large channel with a detectable signal-to-noise ratio of the blockage current. Comparing with small nanopores, a higher threshold voltage of 300 mV is observed to drive the protein into the nanopore. With the voltage increasing, the current blockage events are greatly enhanced and are classified as a function of voltages. At the medium-voltage region, the amplitude of blockage current increases linearly while the dwell time decreases exponentially with the increasing voltage. Despite more free space in our large nanopore, the adsorption and desorption phenomenon of proteins has also been detected with a prolonged dwell time, but it is greatly weakened compared with small nanopore cases. With further increasing voltage, the protein is more likely to be destabilized by the applied electric forces. And a couple of proteins can pass through the nanopore simultaneously. Together, the experiments yield a new aspect of protein transport through a solid-state nanopore with a large scale. The results may help in the future development of nanopore devices such as single-molecule sorting, dynamic molecular interaction, and controllable self-assembly of molecules.

Methods

Chemicals and materials

Pure (>98%) crystallized BSA from Fraction V was purchased from Sigma-Aldrich (St. Louis, MO, USA) and used without further purification. All other chemical reagents used in our experiment were of analytical grade without further purification. All samples were prepared by Milli-Q super purified water with resistance >18 MΩ/cm (Millipore, Billerica, MA, USA). All solutions were filtered with 0.02-μm Anotop filter (Whatman, Maidstone, UK) before using. Nanopores were hydrated with the addition of degassed and filtered KCl electrolyte solution buffer. Electrolyte strength was typically 1 M/1 M KCl cis/trans in protein translocation studies.

Nanopore fabrication

The nanopore used in our study was fabricated in freestanding 100-nm-thick silicon nitride membranes supported by a 300-μm-thick silicon wafer (Si 100) using focused ion beam (FIB) milling followed by feedback-controlled ion beam sculpting. The FEI Strata 201 (Hillsboro, OR, USA) was used with an acceleration voltage of 30 kV and ion current at 1 pA. A great variety of nanopore sizes were obtained in control of the ion dose and ion drilling time. The detailed process is referred to in previous studies [40]. The resulting pore was imaged by scanning electron microscopy (SEM). The pore diameter used in our experiment is about 60 nm, as shown in Figure 1b.

thumbnailFigure 1. Schematic illustrations of the microfluidic setup and nanopore detection. (a) Schematic illustration of the microfluidic setup. A nanopore connects two compartments filled with an electrolyte solution (1 M/1 M KCl cis/trans), separated by a silicon nitride membrane. The application of an electric potential difference via two Ag/AgCl electrodes generates an ionic current through the pore. (b) A SEM image of approximately 60-nm nanopore fabricated by FIB, with a scale bar of 100 nm. (c) The schematic conformation of bovine serum albumin (BSA). Serum is a negatively charged globular protein with 583 residues and consists of three domains (I, II, III); the hydrodynamic diameter of the native state is about 10 nm measured with dynamic light scattering at neutral condition.

Experimental setup

The schematic of the experimental setup is shown in Figure 1a. The nanopore-containing chip encapsulated with two PDMS films was immersed in ionic solutions, which was then divided into two isolated reservoirs; 1 M KCl salt solution was added into the two isolated reservoirs. Two Ag/AgCl electrodes were inserted into the reservoirs, respectively, and connected to a patch clamp amplifier (Axon Instruments, Axopatch 700B, Molecular Devices, Sunnyvale, CA, USA). The ionic current was filtered at 10 kHz and sampled using a 16-bit DAQ card (National Instruments, Austin, TX, USA) for a better signal-to-noise ratio, operated with homemade LabVIEW software. The whole fluidic device was put in a Faraday cage for shielding electromagnetic noise. In order to clean the chip and increase the hydrophilicity of nanopores, silicon nitride chips were soaked in piranha solution (30% H2O2/H2SO4 1:3 (v/v)) for 30 min at 80°C and then rinsed with double-purified water. The dried chip is ready for nanopore experiments.

Results and discussion

Detection of protein translocations

When a positive voltage was applied across the silicon nitride membrane, a uniform, event-free open-pore current was recorded, as shown in Figure 2a. The low noise in the baseline measurement allowed reliable identification of current blockages. Subsequently, the protein was added to the negative reservoir and driven through the nanopore by a set of biased voltages. Unexpectedly, downward current pulses were not observed until a positive voltage of 300 mV was applied. With the increase of the voltage, the occurrence frequency of translocation events was greatly improved. However, the translocation events gradually disappeared when the voltage bias was below 300 mV.

thumbnailFigure 2. Time recording of current traces, contour of electric field distribution, and electric field strength. (a) Time recording of current traces recorded at 100, 300, and 600 mV of biased voltages. As a positive voltage was applied across the SiN membrane, a uniform, event-free open-pore current was recorded. The low noise in the baseline measurement allowed reliable identification of current blockages. After addition of protein in the cis reservoir, downward current pulses were observed at 300 and 600 mV. With the increase of voltages, the occurrence frequency of transition events was greatly improved. (b) Contour of electric field distribution of the cylindrical nanopore with a diameter of 60 nm as a function of biased voltages. (c) Electric field strength along the center axis of the pore.

It is well known that the electric field force is the main driving force for protein translocation through nanopores. Meanwhile, the hydrodynamic drag acting on proteins is opposite to the electrophoretic migration of proteins [8,10,15,41]. Thus, the negatively charged BSA (−18e at pH 7 in 1 M KCl) [29] experiences a competitive diffusion joined by electrophoresis and electroosmosis through the pore [35,41]. When the electric force is large enough to resist the drag forces acting on proteins, the protein is likely to enter the pore and pass through it. Thus, the driving force of the electric field is necessary for protein translocation through nanopores. However, compared with conventional small nanopores [15,29,42], the critical voltage (300 mV) for capturing proteins into the nanopore is higher in our studies. We expect that such a high threshold voltage is mainly associated with the larger dimension of nanopores. This scenario is confirmed by modeling the electric potential and field distribution of the nanopore using COMSOL Multiphysics [43], as shown in Figure 2b,c, where the nanopore is set with a diameter of 60 nm and a thickness of 100 nm. The distribution of the electric field is axially symmetric along the center of the nanopore, and most of the applied voltage drops across the pore (Figure 2b). For the same voltages, the electric field intensity in our pore is less than that of a small nanopore (10 nm). As the applied voltage increases to 300 mV, the electric field distribution is comparable to that of a smaller nanopore (10 nm) at the applied voltage of 120 mV. The electric field strength (E) along the center axis of the pore is also shown in Figure 2c. It is clear that the distribution of the electric field is approximately uniform in the pore while it is sharply decayed in the pore mouth. Thus, protein translocation through nanopores crosses over from almost purely diffusive to drift-dominated motion. There is a characteristic length scale that exists in the pore mouth for two forms of protein motion, which can be described by the Smoluchowski theory with a capture radius of r*[35,44]:

<a onClick="popup('http://www.nanoscalereslett.com/content/9/1/140/mathml/M1','MathML',630,470);return false;" target="_blank" href="http://www.nanoscalereslett.com/content/9/1/140/mathml/M1">View MathML</a>

(1)

Here dp and lp are the diameter and length of the pore, respectively, μ is the electrophoretic mobility, D is the protein diffusion coefficient, and φ is the biased voltage. This shows that the capture radius grows with the pore diameter and the biased voltages, and a bigger capture area can make more proteins trapped into the nanopore. Thus, a high throughput is expected in our nanopore device, which is also confirmed in our studies behind.

In addition, it is worth to mention the current noise in solid-state nanopores, which involves the 1/f-type excess noise and other contributions [45,46]. The 1/f-type noise is related to the fluctuation of charge carriers. As the voltage increases, the accelerated motion of charge carries will cause local ion aggregation in the nanopore, resulting in the increase of 1/f-type excess noise. It can be confirmed from the noise power spectra observed in our experiment (not shown here) and other experiments [45,46].

Protein transport at the medium-voltage region

When the applied voltage is higher than 300 mV, a set of transient downward spikes appears, indicating the translocation of a single protein molecule across the pore. After confirming the ability of our large nanopore with a detectable signal-to-noise ratio, the voltage effects on the translocation signal have been studied in detail. Current blockage signals from individual molecular translocations can be characterized by the time duration (td) and the magnitude of the blockage current (ΔIb). The histograms of the magnitude and dwell time of the transition events are characterized in our work. As shown in Figure 3, the amplitude distribution of blockage events at each voltage is fitted by a Gaussian mixture model. Based on the fitting curves, the peak values of the current blockages at 300, 400, 500, and 600 mV are 298, 481, 670, and 848 pA, respectively, which correspond to the most probable current drops induced by a single protein through the nanopore at varied voltages. The current amplitude linearly increases with the voltages, which yields a slope of 1.83 and an intercept of 265.51, as shown in the inset of Figure 3.

thumbnailFigure 3. Current blockage histograms as a function of applied voltage at medium voltages. The histograms of current amplitude are normalized by fitting with Gaussian distribution; a linear increase of the means of current amplitude as a function of voltage can be clearly visualized in the inset. The numbers of translocation events at 300, 400, 500, and 600 mV are 102, 123, 156, and 160, respectively.

Based on the volume displacement of proteins in the electrolyte solution from the pore, the transient current blockage amplitude ΔIb can be written as

<a onClick="popup('http://www.nanoscalereslett.com/content/9/1/140/mathml/M2','MathML',630,470);return false;" target="_blank" href="http://www.nanoscalereslett.com/content/9/1/140/mathml/M2">View MathML</a>

(2)

where σ is the solution conductivity, φ is the applied voltage between the electrodes, Λ is the excluded volume of a translocation molecule inside the pore, Heff is the effective length of the nanopore, dm is the diameter and lm is the length of a particle molecule, Dp is the average diameter of a cylindrical nanopore, and <a onClick="popup('http://www.nanoscalereslett.com/content/9/1/140/mathml/M3','MathML',630,470);return false;" target="_blank" href="http://www.nanoscalereslett.com/content/9/1/140/mathml/M3">View MathML</a> is a correction factor that depends primarily on the relative geometry of the molecule and the pore [47,48]. Since the spherical-shaped protein is much smaller than the large nanopore, <a onClick="popup('http://www.nanoscalereslett.com/content/9/1/140/mathml/M4','MathML',630,470);return false;" target="_blank" href="http://www.nanoscalereslett.com/content/9/1/140/mathml/M4">View MathML</a> contributes little to the current drop. Thus, ΔIb can be simplified as ΔIb(t) ~ Λφ, implying a linear dependence of the current blockade on the biased voltage. And the excluded volume of proteins in the pore can be calculated from the current drop. Based on the equation, the estimated volume of BSA in our experiments is about 260 nm3, which is very close to that of the native BSA structure (224 nm3) [29]. The volume change is less than 15%; thus, the unfolding of the protein destabilized by electric field forces can be ignored in the medium voltage from 300 to 600 mV, which appears in small nanopores due to the intensive electric field inside the pore [10,18].

Meanwhile, the transition time of proteins also has been analyzed in our experiments. The current blockage duration td is regarded as the dwell time of a protein from the entrance to the exit of the nanopore. Majority of proteins quickly pass through the pore with less than 5 ms, typed as short-lived events. However, there is a small amount of blockage events with a prolonged transition time of tens of milliseconds, regarded as long-lived events, which are observed for protein translocations through small nanopores [31,32,47]. The distribution functions of transition times at each voltage have been analyzed in the present work. As shown in Figure 4, the histogram of dwell times shows an asymmetrical distribution, fitted by an exponential model. The mean transition times at 300, 400, 500, and 600 mV are 3.64, 2.45, 1.49, and 0.93 ms, respectively. An exponentially decaying function (td~ e−v/v0) is employed to fit the dwell time dependent on the voltage, as shown in the inset of Figure 4. Considering that the protein passes though the pore driven by electric forces (F = Qφ/Heff) with an average drift velocity v = Heff/t based on the Einstein relation, the effective diffusion constant can be estimated as Deff= Kb/F ~ 10−9 cm2/s, which is far less than that in bulk (D ~ 10−7 cm2/s) [29]. Hence, there are some interactions of protein-protein and protein-pore involved in the protein transition.

thumbnailFigure 4. Current blockage histograms as a function of applied voltage at medium voltages. The histograms of time duration are fitted by exponential distribution. An exponential function of dwell time versus voltage is defined in the inset.

As mentioned above, the current blockage signals reveal the information of the size, conformation, and interactions of proteins passing through the nanopore. According to both td and Ib, different types of discrete current blockades are characterized in Figure 5. For type I, the current signal has a typical spike shape with a deep intensity and a short dwell time. For type II, the current blockage turns to be rectangle with a similar amplitude but a long transition time. For type III, a distinct asymmetric and retarded current signal is observed with an even longer transition time. Usually, the negatively charged protein will flash past the nanopore driven by the strong electric force within the nanopore, giving the short-lived event as type I. However, given a protein with a high content of charged residues, a variety of electrostatic and hydrophobic interactions are involved in the liquid–solid interface between the protein and nanopore [31]. Once the protein is absorbed in the pore wall, the current signal will be blocked persistently, and it recovers till the protein is desorbed and impelled out the nanopore, showing as the long-lived events of types II and III. The type II event shows an abrupt restore, implying a very fast release of absorption. In contrast, the type III event shows a triangle-shaped signal and a longer restore period, implying a gradual release of absorption. Since the electric field (and thus the main driving force) within the nanopore is much stronger than that around the mouths of the nanopore (see Figure 2), it is reasonable to speculate that the absorption in the type II case is within the pore while that in type III is near the pore mouths. Owing to the decaying electric field in the pore mouth, there is a complicated equilibrium of adsorption and desorption involved between the protein and nanopore in type III. The absorption of protein to the nanopore wall also slows down the velocity of protein translocation, which accounts for the smaller diffusion constant D of proteins in the pore. In contrast with the prolonged dwell time from hundreds of milliseconds to several minutes obtained by small nanopores, the protein adsorption time is shortened and the frequency of the long-lived events is also decreased in larger nanopores. Especially, with the increase of the voltage, the adsorption phenomenon is gradually weakened by the enhanced driving force, and the velocity of protein transition is also speeded up. Thus, an exponential decrease of dwell time versus voltage is shown in Figure 3.

thumbnailFigure 5. Representative current blockades of translocation events at medium voltages. In type I, the negatively charged protein will flash past the nanopore under strong electric forces within the nanopore. In types II and III, the protein is absorbed in the pore and around the pore mouth, respectively, for several milliseconds and then driven through the nanopore.

Protein transport at the high-voltage region

In the study of nanopore experiments, the applied voltage is one of the most critical elements for protein transports, which not only determines how fast protein translocations occur but also affects the interaction between proteins and nanopores [49]. In order to further investigate the voltage effect on protein translocations, the applied voltage was increased up to 900 mV. As expected, even a higher frequency of blockage events is detected at such high voltages. The histograms of the magnitude and dwell time of the translocation events at voltages of 700, 800, and 900 mV are shown in Figure 6. Different from the amplitude distribution with one main peak at the medium voltages, multiple peaks appear at high voltages in Figure 6a. Under these three voltages, the values of main peaks of the current blockages are 1,035, 1,229, and 1,500 pA, respectively, while the values of minor peaks are 2,058, 2,227, and 3,204 pA, respectively. Besides, the distribution of translocation times is also analyzed, as shown in Figure 6b. The most probable dwell times are significantly decreased to 0.75, 0.54, and 0.41 ms at the voltages of 700, 800, and 900 mV, respectively. The prolonged current events arising in medium voltages gradually decreased with increasing voltages. Therefore, besides the acceleration of protein translocations through the nanopore, the absorption interaction between the protein and nanopore is greatly suppressed at high voltages because the enhanced electric force can drag the protein away from the pore wall.

thumbnailFigure 6. Current blockage histograms as a function of applied voltage at high voltages. (a) The histograms of current amplitude are normalized at voltages of 700, 800, and 900 mV. Multiple peaks with greater amplitude appear. (b) The histograms of time duration are fitted by Gaussian distribution at voltages of 700, 800, and 900 mV.

An intriguing question is the origin of the multiple peaks of current blockage that occurred at high voltages. First, a possible mechanism is related to the unfolding state of the protein disrupted by the enhanced electrical force, which is a common phenomenon observed in small nanopores [3,10]. Serum exhibits a heterogeneous charge distribution along its backbone, which allows for individual amino acids to be pulled in opposite directions. The electric force acting on each charged residue of the protein molecule is given by Fi = Qi × E, where Qi is the charge carried by each residue and E is the electric field strength [21], while the summation of Fi is the global driving force applied on the whole protein. The electric force acting on the protein is more than 10 piconewtons (pN) at high voltages above 700 mV. As proteins can be destabilized by elongation forces of several piconewtons based on the force spectroscopy measurements [50-52], the protein is potentially stretched into unfolding state with increasing voltages in the nanopore. Based on excluded volume values estimated from the main peaks at high voltages, the maximal volume change of protein is up to 50% in our high voltage experiments, which indicates that the protein has been stretched into an extended conformation by increased electric forces. Additionally, the excluded volume derived from the minor peak is about twofold of that from the main peak. The substantial growth of current amplitude is not merely the structural change of a single protein. Then we propose that the main peak with low magnitude is described by one protein (partial or full denatured state) entering the pore, and the minor peak with high magnitude is described by two molecules passing through the nanopore at the same time. The dimension of the nanopore is about five times as large as the protein, which allows multiple proteins to simultaneously pass through the nanopore. Especially, the stronger electric forces drive more molecules rapidly towards the nanopore. Thus, there is a higher probability of multiple molecules together entering into the pore at high voltages.

Both types of protein transition events at high voltages have been defined, as shown in Figure 7. For type I, the event presents a short duration and greater amplitude, which suggest that the passing protein is stretched into a larger volume through the nanopore. For type II, the signal shows two blockage pulses. The current amplitude of the first current drop is half of that of the second while the duration of two events is similar with several milliseconds. In this case, a couple of proteins have been impelled into the nanopore simultaneously, which produces a double of current blockage. The current amplitudes of translocation events in the two types are quite different from each other. Nevertheless, the distribution of their transition times is overlapped in our work.

thumbnailFigure 7. Typical examples of translocation events at high voltages. In type I, the negatively charged protein fast passes through the nanopore driven by the strong electric forces. In type II, a couple of molecules simultaneously pass through the nanopore.

Protein capture rates depending on voltages

As described above, nanopore experiments on proteins are observed with long translocation time and low detected event rates at present. A barrier-limited transport is reported in small nanopores involving entropic fluctuation, protein absorption, and electroosmotic effects [3,16,48]. In our large nanopore, a large number of current blockage events are detected with varied voltages. The voltage dependence on the capture rate was analyzed in our work. As observed in Figure 8, the capture rate slowly increases at the medium voltages while it is sharply increased at high voltages. The whole trace of capture rate versus voltages is well fitted by an exponential function based on the Van’t Hoff Arrhenius law [3,16], which can be described as follows:

<a onClick="popup('http://www.nanoscalereslett.com/content/9/1/140/mathml/M5','MathML',630,470);return false;" target="_blank" href="http://www.nanoscalereslett.com/content/9/1/140/mathml/M5">View MathML</a>

(3)

thumbnailFigure 8. The capture rate as a function of voltages. The relationship of capture rate versus voltages is well fitted by an exponential function.

Here R0 ∝ f* exp(−U*/kBT) is the zero voltage capture rate controlled by an activation barrier U* of entropic and electrostatic effect (f* is a frequency factor). The ratio |V|/V0 is a barrier reduction factor due to the applied voltage. The potential V0 corresponds to the necessary applied potential to allow a charged protein to overcome the Brownian motion. From the fitted exponential function, we obtain R0= 3.01 ± 1.1 Hz and V0 = 268 ± 8.9 mV. The voltage value is close to the threshold of 300 mV obtained in our measurement, which is necessary to drive the protein into the nanopore. It is known that the protein translocation through the nanopore is involved in the completion of the electroosmotic flow and electrophoretic mobility. The electroosmotic flow will suppress the penetration of the negatively charged proteins into silicon nitride pores, and its velocity increases with the electrical field. As the electroosmotic effect is dominant in small nanopores, the capture rate would decrease with the applied voltage increasing. However, an exponential increase of capture rate is observed as a function of voltages in our experiment. Thus, the electroosmotic effect is minor in our experiment with a large nanopore. With the increasing voltages, more protein is crowded at the pore entrance. Hence, the phenomenon of two molecules entering into the pore simultaneously occurs due to the high electric potential and large dimension of the nanopore.

Conclusions

In summary, electrically facilitated protein translocation through a large nanopore has been investigated in our work. A large number of current blockage events are detected above the voltage of 300 mV. The distribution of the current magnitude and dwell time of the transition events are characterized as a function of applied voltages. Major proteins rapidly pass through the pore in a short-lived form, while minor long-lived events are observed with a prolonged time. With the increase of voltages, the current amplitude linearly increases while the dwell time is exponentially decreased. Meanwhile, the capture rate of proteins is greatly enhanced with an exponential growth. The protein absorption phenomenon and electroosmotic flow, which are dominant in small pores, are also compared in our work. These phenomena are weakened in large nanopores, especially at high voltages. Based on the excluded volume theory, the conformational change of proteins is estimated during the translocation process, and the unfolding of the protein stretched by intensive electric forces is confirmed at high voltages. The results show a new aspect of protein transport through a solid-state nanopore with a large size, which can provide more motivation for the development of nanopore devices as multifunctional sensors to analyze a wide range of biopolymers and nanomaterials.

Abbreviations

BSA: bovine serum albumin; FIB: focused ion beam; pN: piconewton; SEM: scanning electron microscopy.

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

ZL, QL, and LW designed the protein translocation experiments through nanopores. LW carried out the protein translocation experiments and drafted the manuscript. LW, HL, and WZ participated in the statistical analysis. LW and CH participated in the nanopore fabrication. All authors read and approved the final manuscript.

Acknowledgements

The work was supported by the National Natural Science Foundation of China (Nos. 61071050, 61101056, and 61372031), National Basic Research Program of China (2011CB707600), China Postdoctoral Science Foundation (No. 20110491339), Tsinghua National Laboratory for Information Science and Technology (TNList) Cross-discipline Foundation, and Research Fund for the Doctoral Program of Higher Education of China (No. 20110092130003).

References

  1. Maitra RD, Kim J, Dunbar WB: Recent advances in nanopore sequencing.

    Electrophoresis 2012, 33:3418-3428. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  2. Miles BN, Ivanov AP, Wilson KA, Dogan F, Japrung D, Edel JB: Single molecule sensing with solid-state nanopores: novel materials, methods, and applications.

    Chem Soc Rev 2013, 42:15-28. PubMed Abstract | Publisher Full Text OpenURL

  3. Cressiot B, Oukhaled A, Patriarche G, Pastoriza-Gallego M, Betton JM, Muthukumar M, Bacri L, Pelta J: Protein transport through a narrow solid-state nanopore at high voltage: experiments and theory.

    ACS Nano 2012, 6:6236-6243. PubMed Abstract | Publisher Full Text OpenURL

  4. Oukhaled A, Pastoriza-Gallego M, Bacri L, Mathe J, Auvray L, Pelta J: Protein unfolding through nanopores.

    Protein Pept Lett 2014, 21:266-274. PubMed Abstract | Publisher Full Text OpenURL

  5. Kowalczyk SW, Kapinos L, Blosser TR, Magalhaes T, van Nies P, Lim RY, Dekker C: Single-molecule transport across an individual biomimetic nuclear pore complex.

    Nat Nanotechnol 2011, 6:433-438. PubMed Abstract | Publisher Full Text OpenURL

  6. Oukhaled A, Bacri L, Pastoriza-Gallego M, Betton JM, Pelta J: Sensing proteins through nanopores: fundamental to applications.

    ACS Chem Biol 2012, 7:1935-1949. PubMed Abstract | Publisher Full Text OpenURL

  7. Kowalczyk SW, Blosser TR, Dekker C: Biomimetic nanopores: learning from and about nature.

    Trends Biotechnol 2011, 29:607-614. PubMed Abstract | Publisher Full Text OpenURL

  8. Japrung D, Dogan J, Freedman KJ, Nadzeyka A, Bauerdick S, Albrecht T, Kim MJ, Jemth P, Edel JB: Single-molecule studies of intrinsically disordered proteins using solid-state nanopores.

    Anal Chem 2013, 85:2449-2456. PubMed Abstract | Publisher Full Text OpenURL

  9. Plesa C, Kowalczyk SW, Zinsmeester R, Grosberg AY, Rabin Y, Dekker C: Fast translocation of proteins through solid state nanopores.

    Nano Lett 2013, 13:658-663. PubMed Abstract | Publisher Full Text OpenURL

  10. Freedman KJ, Haq SR, Edel JB, Jemth P, Kim MJ: Single molecule unfolding and stretching of protein domains inside a solid-state nanopore by electric field.

    Sci Rep 2013, 3:1638. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  11. Ding S, Gao C, Gu LQ: Capturing single molecules of immunoglobulin and ricin with an aptamer-encoded glass nanopore.

    Anal Chem 2009, 81:6649-6655. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  12. Li W, Bell NA, Hernandez-Ainsa S, Thacker VV, Thackray AM, Bujdoso R, Keyser UF: Single protein molecule detection by glass nanopores.

    ACS Nano 2013, 7:4129-4134. PubMed Abstract | Publisher Full Text OpenURL

  13. Merstorf C, Cressiot B, Pastoriza-Gallego M, Oukhaled A, Betton JM, Auvray L, Pelta J: Wild type, mutant protein unfolding and phase transition detected by single-nanopore recording.

    ACS Chem Biol 2012, 7:652-658. PubMed Abstract | Publisher Full Text OpenURL

  14. Rotem D, Jayasinghe L, Salichou M, Bayley H: Protein detection by nanopores equipped with aptamers.

    J Am Chem Soc 2012, 134:2781-2787. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  15. Freedman KJ, Jurgens M, Prabhu A, Ahn CW, Jemth P, Edel JB, Kim MJ: Chemical, thermal, and electric field induced unfolding of single protein molecules studied using nanopores.

    Anal Chem 2011, 83:5137-5144. PubMed Abstract | Publisher Full Text OpenURL

  16. Oukhaled A, Cressiot B, Bacri L, Pastoriza-Gallego M, Betton JM, Bourhis E, Jede R, Gierak J, Auvray L, Pelta J: Dynamics of completely unfolded and native proteins through solid-state nanopores as a function of electric driving force.

    ACS Nano 2011, 5:3628-3638. PubMed Abstract | Publisher Full Text OpenURL

  17. Payet L, Martinho M, Pastoriza-Gallego M, Betton JM, Auvray L, Pelta J, Mathé J: Thermal unfolding of proteins probed at the single molecule level using nanopores.

    Anal Chem 2012, 84:4071-4076. PubMed Abstract | Publisher Full Text OpenURL

  18. Rodriguez-Larrea D, Bayley H: Multistep protein unfolding during nanopore translocation.

    Nat Nanotechnol 2013, 8:288-295. PubMed Abstract | Publisher Full Text OpenURL

  19. Chu J, Gonzalez-Lopez M, Cockroft SL, Amorin M, Ghadiri MR: Real-time monitoring of DNA polymerase function and stepwise single-nucleotide DNA strand translocation through a protein nanopore.

    Angew Chem Int Ed Engl 2010, 49:10106-10109. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  20. Freedman H, Huzil JT, Luchko T, Luduena RF, Tuszynski JA: Identification and characterization of an intermediate taxol binding site within microtubule nanopores and a mechanism for tubulin isotype binding selectivity.

    J Chem Inf Model 2009, 49:424-436. PubMed Abstract | Publisher Full Text OpenURL

  21. Freedman KJ, Bastian AR, Chaiken I, Kim MJ: Solid-state nanopore detection of protein complexes: applications in healthcare and protein kinetics.

    Small 2013, 9:750-759. PubMed Abstract | Publisher Full Text OpenURL

  22. Kowalczyk SW, Hall AR, Dekker C: Detection of local protein structures along DNA using solid-state nanopores.

    Nano Lett 2010, 10:324-328. PubMed Abstract | Publisher Full Text OpenURL

  23. Nivala J, Marks DB, Akeson M: Unfoldase-mediated protein translocation through an alpha-hemolysin nanopore.

    Nat Biotechnol 2013, 31:247-250. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  24. Oukhaled AG, Biance AL, Pelta J, Auvray L, Bacri L: Transport of long neutral polymers in the semidilute regime through a protein nanopore.

    Phys Rev Lett 2012, 108:088104. PubMed Abstract | Publisher Full Text OpenURL

  25. Soskine M, Biesemans A, Moeyaert B, Cheley S, Bayley H, Maglia G: An engineered ClyA nanopore detects folded target proteins by selective external association and pore entry.

    Nano Lett 2012, 12:4895-4900. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  26. Zhao Q, de Zoysa RS, Wang D, Jayawardhana DA, Guan X: Real-time monitoring of peptide cleavage using a nanopore probe.

    J Am Chem Soc 2009, 131:6324-6325. PubMed Abstract | Publisher Full Text OpenURL

  27. Firnkes M, Pedone D, Knezevic J, Doblinger M, Rant U: Electrically facilitated translocations of proteins through silicon nitride nanopores: conjoint and competitive action of diffusion, electrophoresis, and electroosmosis.

    Nano Lett 2010, 10:2162-2167. PubMed Abstract | Publisher Full Text OpenURL

  28. Han A, Creus M, Schurmann G, Linder V, Ward TR, de Rooij NF, Staufer U: Label-free detection of single protein molecules and protein-protein interactions using synthetic nanopores.

    Anal Chem 2008, 80:4651-4658. PubMed Abstract | Publisher Full Text OpenURL

  29. Fologea D, Ledden B, McNabb DS, Li J: Electrical characterization of protein molecules by a solid-state nanopore.

    Appl Phys Lett 2007, 91:539011. PubMed Abstract | PubMed Central Full Text OpenURL

  30. Hyun C, Kaur H, Rollings R, Xiao M, Li J: Threading immobilized DNA molecules through a solid-state nanopore at >100 μs per base rate.

    ACS Nano 2013, 7:5892-5900. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  31. Niedzwiecki DJ, Grazul J, Movileanu L: Single-molecule observation of protein adsorption onto an inorganic surface.

    J Am Chem Soc 2010, 132:10816-10822. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  32. Sexton LT, Mukaibo H, Katira P, Hess H, Sherrill SA, Horne LP, Martin CR: An adsorption-based model for pulse duration in resistive-pulse protein sensing.

    J Am Chem Soc 2010, 132:6755-6763. PubMed Abstract | Publisher Full Text OpenURL

  33. Tsutsui M, He Y, Furuhashi M, Rahong S, Taniguchi M, Kawai T: Transverse electric field dragging of DNA in a nanochannel.

    Sci Rep 2012, 2:394. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  34. Yeh LH, Fang KY, Hsu JP, Tseng S: Influence of boundary on the effect of double-layer polarization and the electrophoretic behavior of soft biocolloids.

    Colloids Surf B: Biointerfaces 2011, 88:559-567. PubMed Abstract | Publisher Full Text OpenURL

  35. Wanunu M, Morrison W, Rabin Y, Grosberg AY, Meller A: Electrostatic focusing of unlabelled DNA into nanoscale pores using a salt gradient.

    Nat Nanotechnol 2010, 5:160-165. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  36. Jiang DE, Jin Z, Wu J: Oscillation of capacitance inside nanopores.

    Nano Lett 2011, 11:5373-5377. PubMed Abstract | Publisher Full Text OpenURL

  37. Luan B, Stolovitzky G: An electro-hydrodynamics-based model for the ionic conductivity of solid-state nanopores during DNA translocation.

    Nanotechnology 2013, 24:195702. PubMed Abstract | Publisher Full Text OpenURL

  38. Kocer A, Tauk L, Dejardin P: Nanopore sensors: from hybrid to abiotic systems.

    Biosens Bioelectron 2012, 38:1-10. PubMed Abstract | Publisher Full Text OpenURL

  39. Liu L, Zhu LZ, Ni ZH, Chen YF: Detecting a single molecule using a micropore-nanopore hybrid chip.

    Nanoscale Res Lett 2013, 8:498. PubMed Abstract | BioMed Central Full Text OpenURL

  40. Liu Q, Wu H, Wu L, Xie X, Kong J, Ye X, Liu L: Voltage-driven translocation of DNA through a high throughput conical solid-state nanopore.

    PLoS One 2012, 7:e46014. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  41. Hall AR, van Dorp S, Lemay SG, Dekker C: Electrophoretic force on a protein-coated DNA molecule in a solid-state nanopore.

    Nano Lett 2009, 9:4441-4445. PubMed Abstract | Publisher Full Text OpenURL

  42. Yusko EC, Johnson JM, Majd S, Prangkio P, Rollings RC, Li J, Yang J, Mayer M: Controlling protein translocation through nanopores with bio-inspired fluid walls.

    Nat Nanotechnol 2011, 6:253-260. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  43. Yeh LH, Zhang M, Qian S: Ion transport in a pH-regulated nanopore.

    Anal Chem 2013, 85:7527-7534. PubMed Abstract | Publisher Full Text OpenURL

  44. Gershow M, Golovchenko JA: Recapturing and trapping single molecules with a solid-state nanopore.

    Nat Nanotechnol 2007, 2:775-779. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  45. Smeets RMM, Keyser UF, Dekker NH, Dekker C: Noise in solid-state nanopores.

    PNAS 2008, 105:417-421. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  46. Janssen XJ, Jonsson MP, Plesa C, Soni GV, Dekker C, Dekker NH: Rapid manufacturing of low-noise membranes for nanopore sensors by trans-chip illumination lithography.

    Nanotechnology 2012, 23:475302. PubMed Abstract | Publisher Full Text OpenURL

  47. Li J, Talaga DS: The distribution of DNA translocation times in solid-state nanopores.

    J Phys Condens Matter 2010, 22:454129. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  48. Talaga DS, Li J: Single-molecule protein unfolding in solid state nanopores.

    J Am Chem Soc 2009, 131:9287-9297. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  49. Dorp S, Keyser UF, Dekker NH, Dekker C, Lemay SG: Origin of the electrophoretic force on DNA in solid-state nanopores.

    Nat Phys 2009, 5:347-351. Publisher Full Text OpenURL

  50. Bujalowski PJ, Oberhauser AF: Tracking unfolding and refolding reactions of single proteins using atomic force microscopy methods.

    Methods 2013, 60:151-160. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  51. Liu R, Garcia-Manyes S, Sarkar A, Badilla CL, Fernández JM: Mechanical characterization of protein L in the low-force regime by electromagnetic tweezers/evanescent nanometry.

    Biophys J 2009, 96:3810-3821. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  52. Sischka A, Spiering A, Khaksar M, Laxa M, König J, Dietz KJ, Anselmetti D: Dynamic translocation of ligand-complexed DNA through solid-state nanopores with optical tweezers.

    J Phys Condens Matter 2010, 22:454121. PubMed Abstract | Publisher Full Text OpenURL