|The average thickness and mass densities of buckypapers prepared from SWCNT forest with different height|
|Height of SWCNT forest (μm)||Buckypaper||Average thickness (μm)||Mass density (g/cm3)|
|Compressed at 20 MPa||46||0.50|
|Compressed at 100 MPa||41||0.61|
|Compressed at 20 MPa||47||0.48|
|Compressed at 100 MPa||39||0.62|
|Compressed at 20 MPa||49||0.50|
|Compressed at 100 MPa||38||0.65|
For each height of SWCNT forest, two as-dried buckypapers, one paper after compression at 20 MPa, and one paper after compression at 100 MPa have been prepared. The thickness of the buckypaper was measured by the stylus method instrument. The average thickness of five measurements was obtained from both of the center and the edge of buckypapers.
Sakurai et al.
Sakurai et al. Nanoscale Research Letters 2013 8:546 doi:10.1186/1556-276X-8-546