Resistive switching memory characteristics of Ge/GeOx nanowires and evidence of oxygen ion migration
1 Department of Electronic Engineering, Chang Gung University, 259 Wen-Hwa 1st Rd., Kwei-Shan, Tao-Yuan 333, Taiwan
2 Department of Physics and Meteorology, Indian Institute of Technology, Kharagpur, West Bengal 721302, India
Nanoscale Research Letters 2013, 8:220 doi:10.1186/1556-276X-8-220Published: 8 May 2013
The resistive switching memory of Ge nanowires (NWs) in an IrOx/Al2O3/Ge NWs/SiO2/p-Si structure is investigated. Ge NWs with an average diameter of approximately 100 nm are grown by the vapor–liquid-solid technique. The core-shell structure of the Ge/GeOx NWs is confirmed by both scanning electron microscopy and high-resolution transmission electron microscopy. Defects in the Ge/GeOx NWs are observed by X-ray photoelectron spectroscopy. Broad photoluminescence spectra from 10 to 300 K are observed because of defects in the Ge/GeOx NWs, which are also useful for nanoscale resistive switching memory. The resistive switching mechanism in an IrOx/GeOx/W structure involves migration of oxygen ions under external bias, which is also confirmed by real-time observation of the surface of the device. The porous IrOx top electrode readily allows the evolved O2 gas to escape from the device. The annealed device has a low operating voltage (<4 V), low RESET current (approximately 22 μA), large resistance ratio (>103), long pulse read endurance of >105 cycles, and good data retention of >104 s. Its performance is better than that of the as-deposited device because the GeOx film in the annealed device contains more oxygen vacancies. Under SET operation, Ge/GeOx nanofilaments (or NWs) form in the GeOx film. The diameter of the conducting nanofilament is approximately 40 nm, which is calculated using a new method.