SpringerOpen Newsletter

Receive periodic news and updates relating to SpringerOpen.

Open Access Nano Express

Effects of ZnO nanoparticulate addition on the properties of PMNT ceramics

Methee Promsawat1, Anucha Watcharapasorn12 and Sukanda Jiansirisomboon12*

Author affiliations

1 Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand

2 Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand

For all author emails, please log on.

Citation and License

Nanoscale Research Letters 2012, 7:65  doi:10.1186/1556-276X-7-65

Published: 5 January 2012

Abstract

This research was conducted in order to study the effect of ZnO nanoparticulate addition on the properties of 0.9 Pb(Mg1/3Nb2/3)O3-0.1PbTiO3 [PMNT] ceramics. The PMNT ceramics were prepared by a solid-state reaction. The ZnO nanoparticles were added into PMNT ceramics to form PMNT/xZnO (x = 0, 0.05, 0.1, 0.5, and 1.0 wt.%). The PMNT/xZnO ceramics were investigated in terms of phase, microstructure, and mechanical and electrical properties. It was found that the density and grain size of PMNT ceramics tended to increase with an increasing amount of ZnO content. Moreover, a transgranular fracture was observed for the samples containing ZnO, while pure PMNT ceramics showed only a intergranular fracture. An addition of only 0.05 wt.% of ZnO was also found to enhance the hardness and dielectric and ferroelectric properties of the PMNT ceramics.

Keywords:
ceramics; X-ray diffraction; microstructure