Open Access Open Badges Nano Express

Stability of SiNX/SiNX double stack antireflection coating for single crystalline silicon solar cells

Youngseok Lee1, Daeyeong Gong2, Nagarajan Balaji1, Youn-Jung Lee1 and Junsin Yi12*

Author affiliations

1 Department of Energy Science, Sungkyunkwan University, 300 Chunchun-dong, Jangan-gu, Suwon, 440-746, South Korea

2 School of Information and Communication Engineering, Sungkyunkwan University, 300 Chunchun-dong, Jangan-gu, Suwon, 440-746, South Korea

For all author emails, please log on.

Citation and License

Nanoscale Research Letters 2012, 7:50  doi:10.1186/1556-276X-7-50

Published: 5 January 2012


Double stack antireflection coatings have significant advantages over single-layer antireflection coatings due to their broad-range coverage of the solar spectrum. A solar cell with 60-nm/20-nm SiNX:H double stack coatings has 17.8% efficiency, while that with a 80-nm SiNX:H single coating has 17.2% efficiency. The improvement of the efficiency is due to the effect of better passivation and better antireflection of the double stack antireflection coating. It is important that SiNX:H films have strong resistance against stress factors since they are used as antireflective coating for solar cells. However, the tolerance of SiNX:H films to external stresses has never been studied. In this paper, the stability of SiNX:H films prepared by a plasma-enhanced chemical vapor deposition system is studied. The stability tests are conducted using various forms of stress, such as prolonged thermal cycle, humidity, and UV exposure. The heat and damp test was conducted for 100 h, maintaining humidity at 85% and applying thermal cycles of rapidly changing temperatures from -20°C to 85°C over 5 h. UV exposure was conducted for 50 h using a 180-W UV lamp. This confirmed that the double stack antireflection coating is stable against external stress.

SiNX; PECVD; double stack; stability; temperature; humidity test.