SpringerOpen Newsletter

Receive periodic news and updates relating to SpringerOpen.

Open Access Nano Express

Synthesis and electrical property of metal/ZnO coaxial nanocables

Zhi Li, Guanzhong Wang*, Qianhui Yang, Zhibin Shao and Yang Wang

Author Affiliations

Hefei National Laboratory for Physical Sciences at Microscale and Department of Physics, University of Science and Technology of China, Hefei, Anhui, 230026, People's Republic of China

For all author emails, please log on.

Nanoscale Research Letters 2012, 7:316  doi:10.1186/1556-276X-7-316


The electronic version of this article is the complete one and can be found online at: http://www.nanoscalereslett.com/1556-276X/7/1/316


Received:1 March 2012
Accepted:19 June 2012
Published:19 June 2012

© 2012 Li et al.; licensee Springer.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Ag/ZnO and Cu/ZnO coaxial nanocables were fabricated using AgNO3 or copper foil as source materials by the vapor-liquid-solid process. The coaxial nanocables consist of a crystalline metallic Ag or Cu core and a semiconductor ZnO shell. The evolution of the Ag/ZnO products having different morphologies was investigated by stopping the heating at different temperatures. The diameters of the Ag/ZnO nanocables and the Ag cores could be modulated by changing Ag ratio in the source. The electrical characteristics of the Ag/ZnO contact and the influence of annealing reveal a Schottky diode behavior for a single Ag/ZnO nanocable device. The nanocables with uniform shape and controlled size are expected to provide a new choice in various applications of biological detection, nanothermometer, and photocatalysis.

Keywords:
Ag; Cu; ZnO; Coaxial nanocables; Vapor-liquid-solid process; Schottky contact

Background

Metal-semiconductor heterogeneous nanostructures have attracted particular attention due to their unique optical, electrical, and catalytic properties [1-3]. ZnO, with a direct wide bandgap energy of 3.37 eV at room temperature, is an important short-wavelength optoelectronic material and has drawn much attention. An enormous variety of ZnO nanostructures such as nanowires, nanobelts, and nanocables has been synthesized by a variety of techniques [4-6]. In particular, metal-ZnO nano-heterostructures have become an active frontier because of their wide application in dye-sensitized solar cells, photocatalysis, and biological detection [7-14]. For example, metal-ZnO Schottky diode is a fundamental component of a device for realizing one-dimensional (1D) nanoelectronics, which is useful for hydrogen sensor, strain sensor, and electrical switch [15-17]. Recently, some metal-ZnO nanostructures have been prepared by wet chemical routes, such as Au/ZnO hybrid nanoparticles, Pb/ZnO nanocables, and ZnO loaded with metal tips or dots [18-24]. However, nanostructures synthesized by wet chemical route usually have poor crystalline quality. The vapor-liquid-solid (VLS) method has been considered as the most promising method for fabricating 1D nanostructures, owing to the fact that the size of the nanostructures can be precisely controlled by the metal catalyst. A variety of functional 1D nanostructures, including silicon nanowires, carbon nanotubes, GaP nanowires, and ZnO nanobelts, has been demonstrated [25-28]. In addition, as far as we know, only Pb/ZnO and Zn/ZnO nanocables were studied in the case of metal/ZnO nanocables [20,29] Moreover, few properties of the metal-ZnO heterostructures were investigated, especially their electrical characteristics. Therefore, it is important to explore reliable approaches to synthesize metal/ZnO coaxial nanocables with different metal components and to study their contact characteristics.

Here, we report a one-step thermal evaporation route to fabricate the Ag/ZnO and Cu/ZnO coaxial nanocables via the VLS growth mechanism. The coaxial nanocables consist of a crystalline metallic Ag or Cu core and a semiconductor ZnO shell. The diameters of Ag/ZnO nanocables and the Ag cores could be modulated by changing Ag ratio in the source. The electrical characteristics of the Ag/ZnO contact and the influence of annealing on the contact were investigated. This approach can be extended to synthesize other metal/semiconductor coaxial nanocables for applications of the nanodevices.

Methods

Ag/ZnO nanocables were synthesized in a conventional tube furnace using AgNO3 and ZnO as the source. An amount of 0.5 g of AgNO3 powder was placed at the bottom of an alumina boat, and 1 g of ZnO powder was added on the AgNO3 layer. The boat was put into the center of a ceramic tube that was mounted on the tube furnace. As a substrate, a Si (100) wafer was put in the low-temperature zone. The tube was evacuated to 10−2 Torr before it was heated, and the pressure was kept through the synthesizing process. No carrier gas was used in the whole process. It took about 35 min before the tube reached the desired temperature of about 1,300°C when the substrate temperature was about 950°C. Then, the heating was turned off, and the system was naturally cooled to room temperature. Cu/ZnO nanocables were obtained under the same condition except that 0.12 g copper foil, instead of AgNO3 powder, was used as the source material and that the substrate temperature was about 1,050°C.

The as-grown products were characterized by X-ray diffraction (XRD) with Cu Kα radiation (wavelength, 1.5045 Å) used as an incident X-ray source. Scanning electron microscopy (SEM) images were obtained on a field-emission SEM (JEOL JSM-6700 F, JEOL Ltd., Akishima, Tokyo, Japan). The products were also examined using a high-resolution transmission electron microscope (HRTEM, JEOL 2010, JEOL Ltd., Akishima, Tokyo, Japan) operating at 200 kV and X-ray photoelectron spectroscopy (XPS; VG ESCALAB X-ray photoelectron spectra spectrometer, VG Scientia Inc., Pleasanton, CA, USA). Their components were determined via energy-dispersive X-ray spectroscopy (EDS) attached in the HRTEM system. Photoluminescence (PL) spectra were measured at room temperature using a He-Cd laser (325 nm) as excitation source.

The electrical measurements of a single Ag/ZnO nanocable were performed by a one-axis manual linear translation stage. A nanocable was affixed to the tip of a tungsten probe attached on the stage by conductive silver epoxy. The nanocable was driven by the stage to approach an Au foil gradually until the Ag particle at the tip of the nanocable was in contact with the Au foil. The current-voltage (I-V) characteristics were measured by a picoammeter/voltage source (Keithley 6487 model, Keithley Instruments Inc., Cleveland, OH, USA) when voltage was applied between the ZnO shell and the Ag core.

Results and discussion

(Figure 1a) shows a SEM image of the as-synthesized products using ZnO and AgNO3 as the source. Most of them are uniform nanowires with nanoparticles attached on the freestanding end. The lengths of the wires are up to 50 μm, and the diameters are in the range of 0.4 to 1.0 μm. The particles are truncated octahedrons as shown in the inset of (Figure 1a). The XRD pattern taken from this sample is given in (Figure 1b). All the peaks can be assigned to hexagonal ZnO and face-center-cubic Ag. No other peak is observed.

thumbnailFigure 1. SEM images and XRD pattern of the products. (a) SEM image of the products obtained using ZnO and AgNO3 as the source. The inset is a higher magnification image. (b) A typical XRD pattern of the products.

The detailed morphology and the chemical composition of the product were further characterized by transmission electron microscopy (TEM) and EDS, respectively. The TEM image of the tip region of a nanowire reveals that the nanowire has a coaxial nanocable structure with distinct interface as shown in (Figure 2a). It is clearly recognized that the polyhedron particle on top of the nanocable was connected with the inner core, which is an obvious evidence of the VLS growth mechanism. The same contrast in the TEM image of the connected core and the particle suggests that both the core and the particle are possibly the same material, which is confirmed by the EDS spectra. (Figure 2b) shows the TEM image of the other end of the same nanocable, which describes the portion where the core started. The inner core part was not always continuous across the whole nanocable, but a cavity could appear between two segments of the core in some nanocables. Most of the cavities in nanocables were completely filled according to our TEM observations, and the nanocables can be looked as filled nanotubes. To determine the compositions of the core and shell of the nanocable, EDS spectra were taken from different parts of the nanocable. (Figure 2c) shows the EDS spectrum taken from the capping particle (area C in Figure 2a), and only Ag and Cu signals are detected. The presence of Cu is likely due to the Cu TEM grid on which the sample was affixed. (Figure 2d) shows the EDS spectrum obtained from the middle of the nanocable (area D in Figure 2a). Besides Ag and Cu, Zn and O are also detected. The EDS spectrum taken from the shell of the nanocable (area E in Figure 2a) only shows the existence of Zn, O, and Cu. No Ag signal is detected. Taking all the observations into account, the nanocable is a heterostructure that a ZnO nanotube filled with metallic Ag except for a few unfilled segments in some cases.

thumbnailFigure 2. TEM images and EDS spectra of an Ag/ZnO nanocable. (a) The freestanding end with a Ag nanoparticle capped at the tip region. (b) The bottom end of the nanocable. (c,d,e) EDS spectra taken from the circled areas marked with C, D, and E in (a).

The SEM image (Figure 3a) shows that the Cu/ZnO nanocables have an average diameter of 300 nm, smaller than the Ag/ZnO nanocables. The TEM images in (Figure 3b,c) and the corresponding EDS results (see 1) confirm that the nanocable contains a ZnO shell and a Cu core connected with a Cu particle at the tip. The growth of the Cu/ZnO nanocables was likely guided by the same mechanism of the growth of Ag/ZnO nanocables.

Additional file 1:. Figure S1. Description: For Figure S1, (a to c) EDS spectra taken from the capping particle, the middle, and the shell of a Cu/ZnO nanocable from the sample shown in (Figure 3), respectively. Nickel grids were used in the measurement to make sure that the Cu signals come from the sample, not from the TEM grid.

Format: PDF Size: 179KB Download file

This file can be viewed with: Adobe Acrobat ReaderOpen Data

thumbnailFigure 3. SEM and TEM images of Cu/ZnO nanocables. (a) SEM image of Cu/ZnO nanocables. The inset is a higher magnification image. (b,c) TEM images of Cu/ZnO nanocables.

To understand the growth mechanism of these coaxial nanocables, synthesis of the Ag/ZnO nanocables under different conditions was conducted in an effort to observe the growth evolution of the nanocable structure. We kept the same heating power and stopped heating as soon as the temperature reached 1,250°C, 1,280°C, 1,290°C, and 1,320°C, respectively. The SEM images of the corresponding products are given in (Figure 4a,b,c,d), respectively. For the sample obtained from the heating stopped at 1,250°C or 1,280°C, only Ag-Zn alloy particles formed on the substrate (Figure 4a,b). If the heating was stopped when the temperature reached to 1,290°C, nanocables started to nucleate on the substrate (Figure 4c). When the temperature increased directly to 1,300°C after about 4 min of heating from 1,290°C, the nanocables could grow as long as 50 μm, as shown in (Figure 1a). Finally, high-density nanocables were grown as the temperature increased directly to 1,320°C (Figure 4d). (Figure 4e,f) shows the products fabricated with a reduced AgNO3 amount of 0.25 and 0.1 g while the amount of ZnO was kept the same, respectively. Products shown in (Figure 4e) still have a nanocable structure with a reduced diameter of 300 nm in average. Correspondingly, the diameter of the core decreased from 200 to 100 nm in average. When the amount of AgNO3 in the source was further decreased to 0.1 g, the diameter of the products decreased below 200 nm, as shown in (Figure 4f), and no evidence of Ag inner core was found in these products ( 2). We suggest that the lower Ag concentration in the vapor results in smaller alloy particles formed at the initial growth stage, which changes the size of the wires. Smaller catalyst particle led to the decrease of the solid-liquid interface, and in this case, the center of the interface was easier to be oxidized to form ZnO if the oxygen concentration keeps the same. Thus, diameters of both the nanocable and the core decreased with reduction in the amount of AgNO3. No nanocables but ZnO nanowires were finally formed when the entire interface is oxidized [30]. Similar results were found for the Cu/ZnO nanocables. As shown in 2, SEM and TEM images reveal that only ZnO nanowires were formed as the substrate temperature decreased to 950°C.

Additional file 2:. Figure S2. Description: For Figure S2, (a) SEM and (b) TEM images of Cu/ZnO products obtained at the same experimental condition as the sample in (Figure 3 )except only the substrate is located in the low-temperature zone of 950°C. (c) TEM image of Ag/ZnO products obtained at the same experimental condition as the sample in (Figure 1) except only 0.1 g AgNO3 and 1 g ZnO were used as source materials.

Format: PDF Size: 188KB Download file

This file can be viewed with: Adobe Acrobat ReaderOpen Data

thumbnailFigure 4. Ag/ZnO nanocables synthesized under different conditions. (a,b,c,d) SEM images of the products obtained using ZnO and AgNO3 as the source at reaction temperatures of 1,250°C, 1,280°C, 1,290°C, and 1,320°C, respectively. The inset in (c) is a higher magnification image. (e,f) SEM images of the products with AgNO3 of 0.25 and 0.1 g, respectively. The inset in (e) is a TEM image, and the inset in (f) is a higher magnification SEM image.

A detailed schematic illustration of the formation process is shown in Figure 5. During the heating process, AgNO3 decomposed firstly due to its low decomposition temperature of 440°C. Because the AgNO3 was covered by ZnO powder in our experiments, Ag particles could be formed in situ from the decomposition of AgNO3. Then, with Ag vapor regenerated along with the increase of temperature, Ag droplets formed on the substrate and served as the catalyst. In the same time, Zn and O vapors were transported and adsorbed on the surface of the catalyst. When the alloy droplets became supersaturated, ZnO was phase-separated and crystallized to form ZnO nanowires as shown in (Figure 4c). With O content decreasing in the droplet, ZnO nanotubes started to form, and the liquid droplet was sucked into the hollow cavity due to the capillarity effect, similar to that observed in indium-filled In2O3 nanotubes [31]. Zn atoms diffused out from the alloy and were oxidized to ZnO, leaving Ag to fill the nanotube, same as shown in (Figure 2b). The droplets maintained their high activity to absorb Ag, Zn, and O vapors during the growth process, thereby resulting in continuous elongation of coaxial nanocables. As Zn and O were exhausted in the droplet after the reaction was finished, Ag was separated from ZnO during the slow cooling process [32]; a regular polyhedron shape of Ag crystal was finally formed at the tip because of the minimization of the surface energy [33]. Glaspell et al. have reported MgO and ZnO nanowires terminated by transition metal (Fe, Co, Ni) tips via the VLS process. The structures were similar to our results except having no inner core. They mentioned that the morphology of the tips depended on the nature of the metal catalyst. This can also explain the morphology difference between Ag and Cu nanoparticles capped at the tip region in our results [34]. Cu/ZnO nanocables were also successfully synthesized via a similar mechanism as that of Ag/ZnO, owing to the similarity between the Ag-Zn and Cu-Zn binary phase diagrams. This implies that the proposed method may be universal in preparing metal/semiconductor coaxial nanocables.

thumbnailFigure 5. The schematic illustration of the growth models for Ag/ZnO nanocables.

The optical properties of the Ag/ZnO and Cu/ZnO nanocables were characterized by PL measurements at room temperature. As shown in (Figure 6a), the two characteristic emissions were detected for each sample. The band edge emission is centered at 384 nm for Ag/ZnO nanocables and 385 nm for Cu/ZnO nanocables. The deep trap emission due to defect states is around 522 nm for Ag/ZnO nanocables and 513 nm for Cu/ZnO nanocables. The deep trap emission is much more intense than the band edge emission for both samples compared to normal ZnO nanowires, indicating that the as-prepared nanostructures contained many defects related to oxygen vacancies [35]. The XPS analysis was carried out to investigate the surface structure of the Ag/ZnO nanocables. All peaks in the XPS full spectrum shown in (Figure 6b) can be ascribed to Zn, Ag, O, and C elements, which is consistent with the above XRD and EDS results. The high-resolution spectra for Ag species are shown in the inset in (Figure 6b). The binding energies of Ag 3d5/2 and Ag 3d3/2 for the Ag/ZnO nanocables are 367.7 and 373.7 eV, respectively, which shift remarkably to the lower binding energy compared with the corresponding values of the synthesized pure metallic Ag (the standard binding energies of Ag 3d5/2 and Ag 3d3/2 for bulk Ag are about 368.2 and 374.2 eV, respectively). Since the work function of silver (4.26 eV) is smaller than that of ZnO (5.2 to 5.3 eV), electrons will transfer from Ag to ZnO at the interfaces of the Ag/ZnO nanocables, resulting in a new Fermi energy level in Ag/ZnO nanocables. Therefore, the binding energies of Ag 3d5/2 and Ag 3d3/2 shift to the lower ones in the Ag/ZnO nanocables [13].

thumbnailFigure 6. PL spectra and XPS spectrum of the nanocables. (a) PL spectra of Ag/ZnO and Cu/ZnO nanocables on Si substrate. Each spectrum is normalized by its maximal intensity for easy comparison. (b) The XPS spectrum of Ag/ZnO nanocables. The high-resolution spectra for Ag species are shown in the inset.

(Figure 7a,b) shows the schematic of the setup to measure the electrical properties of the Ag/ZnO contacts and the optical image of the Ag/ZnO nanocable affixed to the probe. Forward I-V characteristics from as-grown Ag/ZnO nanocables and those annealed at 400°C in air for 1 h are shown in (Figure 7c,d). The I-V characteristics exhibit well-defined rectifying behavior of a Schottky barrier diode structure, which mainly reflects current transport across the metal-semiconductor interface. It is described by the thermionic emission relation:

<a onClick="popup('http://www.nanoscalereslett.com/content/7/1/316/mathml/M1','MathML',630,470);return false;" target="_blank" href="http://www.nanoscalereslett.com/content/7/1/316/mathml/M1">View MathML</a>

(1)

where I is the current, S is the area of the Schottky barrier, A* is Richardson's constant for n-type ZnO, ΦSB is the Schottky barrier height, T is the temperature, V is the applied voltage, RS is the series resistance, and n is the ideality factor. Here, the S value is estimated by the diameter and length of the Ag core of 200 nm and 20 μm, respectively.

thumbnailFigure 7. The electrical characteristics of the Ag/ZnO contact and the influence of annealing. (a) Schematic of the measurement system to characterize the performance of the device. (b) Optical image of the nanocable affixed to the probe. The inset is a higher magnification image of the tip region. (c) I-V characteristics of a single Ag/ZnO nanocable before and after annealing in the air at 400°C for 1 h. (d) Logarithm plot of the current using the data in (c).

Table 1 shows a summary of the contact properties of the as-grown and annealed nanocables. The barrier height of the as-grown samples is 0.313 eV. The ideality factor n is a quantity for describing the deviation of the diode from an ideal Schottky barrier for which n = 1. The ideality factor of the Ag/ZnO Schottky barrier before annealing is determined to be 1.455, which is close to 1. IS is the saturation current. The effect of the annealing is to lower the barrier height (from 0.313 eV in the as-grown samples to 0.298 eV in those annealed at 400°C) and increase the saturation current (from 1.004 × 10−10 A in the as-grown samples to 1.811 × 10−10 A in the annealed samples), which is consistent with the early report [36]. The changes can be attributed to the interface roughening after annealing.

Table 1. Schottky barrier properties of Ag-ZnO contact before and after 400°C annealing

Conclusion

In summary, Ag/ZnO and Cu/ZnO coaxial nanocables were fabricated by thermally evaporating the source material of ZnO and AgNO3 (or copper foil) using the vapor-liquid-solid mechanism. SEM, TEM, and EDS results reveal that the coaxial nanocables consist of a crystalline metallic Ag or Cu core and a semiconductor ZnO shell. The diameters of Ag/ZnO nanocables and the Ag cores could be modulated by changing Ag ratio in the source. PL measurements show that Ag/ZnO and Cu/ZnO coaxial nanocables have the band edge emissions and the deep trap emissions due to defect states. The electrical characteristics of the Ag/ZnO contact and the influence of annealing reveal a Schottky diode behavior for a single Ag/ZnO nanocable device.

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

GW led the project and participated in the design of the experiments, analysis of the data, and revision of the manuscript. ZL designed and carried out the experiments and drafted the manuscript. ZS participated in the design. QY and YW contributed to the electrical testing. All authors read and approved the final manuscript.

Acknowledgments

This work was supported by the National Basic Research Program of China (2009CB939901, 2011CB921400) and the Natural Science Foundation of China (Grant Nos. 50772110, 50721091).

References

  1. Enache DI, Edwards JK, Landon P, Solsona-Espriu B, Carley AF, Herzing AA, Watanabe M, Kiely CJ, Knight DW, Hutchings GJ: Solvent-free oxidation of primary alcohols to aldehydes using Au-Pd/TiO2 catalysts.

    Science 2006, 311:362. PubMed Abstract | Publisher Full Text OpenURL

  2. Lee JS, Shevchenko EV, Talapin DV: Au-PbS core-shell nanocrystals: plasmonic absorption enhancement and electrical doping via intra-particle charge transfer.

    J Am Chem Soc 2008, 130:9673. PubMed Abstract | Publisher Full Text OpenURL

  3. Zhang WQ, Lu Y, Zhang TK, Xu W, Zhang M, Yu SH: Controlled synthesis and biocompatibility of water-soluble ZnO nanorods/Au nanocomposites with tunable UV and visible emission intensity.

    J Phys Chem C 2008, 112:19872. Publisher Full Text OpenURL

  4. Kong XY, Ding Y, Yang RS, Wang ZL: Single-crystal nanorings formed by epitaxial self-coiling of polar-nanobelts.

    Science 2004, 303:1348. PubMed Abstract | Publisher Full Text OpenURL

  5. Fouad OA, Glaspell G, El-Shall MS: Structural, optical and gas sensing properties of ZnO, SnO2 and ZTO nanostructures.

    NANO: Brief Report and Reviews 2010, 5:185. OpenURL

  6. Fouad OA, Khder AS, Dai Q, El-Shall MS: Structural and catalytic properties of ZnO and Al2O3 nanostructures loaded with metal nanoparticles.

    J Nanoparticle Res 2011, 13:7075. Publisher Full Text OpenURL

  7. Chen ZH, Tang YB, Liu CP, Leung YH, Yuan GD, Chen LM, Wang YQ, Bello I, Zapien JA, Zhang WJ, Lee CS, Lee ST: Vertically aligned ZnO nanorod arrays sentisized with gold nanoparticles for Schottky barrier photovoltaic cells.

    J Phys Chem C 2009, 113:13433. Publisher Full Text OpenURL

  8. Ren CL, Yang BF, Wu M, Xu J, Fu ZP, Lv Y, Guo T, Zhao YX, Zhu CQ: Synthesis of Ag/ZnO nanorods array with enhanced photocatalytic performance.

    J Hazard Mater 2010, 182:123. PubMed Abstract | Publisher Full Text OpenURL

  9. Zeng HB, Liu PH, Cai WP, Yang SK, Xu XX: Controllable Pt/ZnO porous nanocages with improved photocatalytic activity.

    J Phys Chem C 2008, 112:19620. Publisher Full Text OpenURL

  10. Lin DD, Wu H, Zhang R, Pan W: Enhanced photocatalysis of electrospun Ag-ZnO heterostructured nanofibers.

    Chem Mater 2009, 21:3479. Publisher Full Text OpenURL

  11. Georgekutty R, Seery MK, Pillai SC: A highly efficient Ag-ZnO photocatalyst: synthesis, properties, and mechanism.

    J Phys Chem C 2008, 112:13563. Publisher Full Text OpenURL

  12. Zheng YH, Zheng LR, Zhan YY, Lin XY, Zheng Q, Wei KM: Ag/ZnO heterostructure nanocrystals: synthesis, characterization, and photocatalysis.

    Inorg Chem 2007, 46:6980. PubMed Abstract | Publisher Full Text OpenURL

  13. Gu CD, Cheng C, Huang HY, Wong TL, Wang N, Zhang TY: Growth and photocatalytic activity of dendrite-like ZnO@Ag heterostructure nanocrystals.

    Cryst. Growth Des 2009, 9:3278. Publisher Full Text OpenURL

  14. Subramanian V, Wolf EE, Kamat PV: Green emission to probe photoinduced charging events in ZnO-Au nanoparticles. Charge distribution and Fermi-level equilibration.

    J Phys Chem B 2003, 107:7479. Publisher Full Text OpenURL

  15. Das SN, Kar JP, Choi J-H, Lee TI, Moon K-J, Myoung J-M: Fabrication and characterization of ZnO single nanowire-based hydrogen sensor.

    J Phys Chem C 2010, 114:1689. Publisher Full Text OpenURL

  16. Zhou J, Gu YD, Fei P, Mai WJ, Gao YF, Yang RS, Bao G, Wang ZL: Flexible piezotronic strain sensor.

    Nano Lett 2008, 8:3035. PubMed Abstract | Publisher Full Text OpenURL

  17. Zhou J, Fei P, Gu YD, Mai WJ, Gao YF, Yang RS, Bao G, Wang ZL: Piezoelectric-potential-controlled polarity-reversible Schottky diodes and switches of ZnO wires.

    Nano Lett 2008, 8:3973. PubMed Abstract | Publisher Full Text OpenURL

  18. Li P, Wei Z, Wu T, Peng Q, Li YD: Au-ZnO hybrid nanopyramids and their photocatalytic properties.

    J Am Chem Soc 2011, 133:5660. PubMed Abstract | Publisher Full Text OpenURL

  19. Herring NP, AbouZeid K, Mohamed MB, Pinsk J, El-Shall MS: Formation mechanisms of gold-zinc oxide hexagonal nanopyramids by heterogeneous nucleation using microwave synthesis.

    Langmuir 2011, 27:15146. PubMed Abstract | Publisher Full Text OpenURL

  20. Wang C-Y, Gong N-W, Chen L-J: High-sensitivity solid-state Pb(core)/ZnO(shell) nanothermometers fabricated by a facile galvanic displacement method.

    Adv Mater 2008, 20:4789. Publisher Full Text OpenURL

  21. Im J, Singh J, Soares JW, Steeves DM, Whitten JE: Synthesis and optical properties of dithiol-linked ZnO/gold nanoparticle composites.

    J Phys Chem C 2011, 115:10518. Publisher Full Text OpenURL

  22. Lin DD, Wu H, Zhang W, Li H, Pan W: Enhanced UV photoresponse from heterostructured Ag–ZnO nanowires.

    Appl Phys Lett 2009, 94:172103. Publisher Full Text OpenURL

  23. Sun ZH, Wang CX, Yang JX, Zhao B, Lombardi JR: Nanoparticle metal–semiconductor charge transfer in ZnO/PATP/Ag assemblies by surface-enhanced Raman spectroscopy.

    J Phys Chem C 2008, 112:6093. Publisher Full Text OpenURL

  24. Lee J, Shim HS, Lee M, Song JK, Lee D: Size-controlled electron transfer and photocatalytic activity of ZnO-Au nanoparticle composites.

    J. Phys. Chem. Lett. 2011, 2:2840. Publisher Full Text OpenURL

  25. Morales AM, Lieber CM: A laser ablation method for the synthesis of crystalline semiconductor nanowires.

    Science 1998, 279:208. PubMed Abstract | Publisher Full Text OpenURL

  26. Hu JT, Odom TW, Lieber CM: Chemistry and physics in one dimension: synthesis and properties of nanowires and nanotubes.

    Acc Chem Res 1999, 32:435. Publisher Full Text OpenURL

  27. Gudiksen MS, Lieber CM: Diameter-selective synthesis of semiconductor nanowires.

    J Am Chem Soc 2000, 122:8801. Publisher Full Text OpenURL

  28. Zhao MH, Wang ZL, Mao SX: Piezoelectric characterization of individual zinc oxide nanobelt probed by piezoresponse force microscope.

    Nano Lett 2004, 4:587. Publisher Full Text OpenURL

  29. Hu JQ, Li Q, Meng XM, Lee CS, Lee ST: Thermal reduction route to the fabrication of coaxial Zn/ZnO nanocables and ZnO nanotubes.

    Chem Mater 2002, 15:305. OpenURL

  30. Kong XH, Sun XM, Li XL, Li YD: Catalytic growth of ZnO nanotubes.

    Mater Chem Phys 2003, 82:997. Publisher Full Text OpenURL

  31. Li YB, Bando Y, Golberg D: Single-crystalline In2O3 nanotubes filled with In.

    Adv Mater 2003, 15:581. Publisher Full Text OpenURL

  32. Wei DP, Chen Q: Evolution of catalyst droplets during VLS growth and cooling process: a case of Ge/ZnO nanomatchsticks.

    Cryst. Growth Des. 2009, 10:122. OpenURL

  33. Yang SH, Chen PC, Hong SY: Characterizations of Ag-catalyzed ZnO nanostructures prepared by vapor-solid mechanism.

    Curr. Appl. Phys. 2009, 9:e180. Publisher Full Text OpenURL

  34. Glaspell G, Hassan HMA, Elzatahry A, Fuoco L, Radwan NRE, El-Shall MS: Nanocatalysis on tailored shape supports: Au and Pd nanoparticles supported on MgO nanocubes and ZnO nanobelts.

    J Phys Chem B 2006, 110:21387. PubMed Abstract | Publisher Full Text OpenURL

  35. Li CR, Lu NP, Mei J, Dong WJ, Zheng YY, Gao L, Tsukamoto K, Cao ZX: Polyhedral to nearly spherical morphology transformation of silver microcrystals grown from vapor phase.

    J. Cryst. Growth 2011, 314:324. Publisher Full Text OpenURL

  36. Khanna R, Ip K, Heo YW, Norton DP, Pearton SJ, Ren F: Thermal degradation of electrical properties and morphology of bulk single-crystal ZnO surfaces.

    Appl Phys Lett 2004, 85:3468. Publisher Full Text OpenURL