SpringerOpen Newsletter

Receive periodic news and updates relating to SpringerOpen.

Open Access Nano Commentary

Pool boiling of nanoparticle-modified surface with interlaced wettability

Chin-Chi Hsu, Tsung-Wen Su and Ping-Hei Chen*

Author affiliations

Department of Mechanical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd, Taipei, 10617, Taiwan

For all author emails, please log on.

Citation and License

Nanoscale Research Letters 2012, 7:259  doi:10.1186/1556-276X-7-259

Published: 18 May 2012

Abstract

This study investigated the pool boiling heat transfer under heating surfaces with various interlaced wettability. Nano-silica particles were used as the coating element to vary the interlaced wettability of the surface. The experimental results revealed that when the wettability of a surface is uniform, the critical heat flux increases with the more wettable surface; however, when the wettability of a surface is modified interlacedly, regardless of whether the modified region becomes more hydrophilic or hydrophobic, the critical heat flux is consistently higher than that of the isotropic surface. In addition, this study observed that critical heat flux was higher when the contact angle difference between the plain surface and the modified region was smaller.

Keywords:
Hydrophilic; Hydrophobic; Critical heat flux; Boiling heat transfer