Early stages of growth of gold layers sputter deposited on glass and silicon substrates
1 Nuclear Physics Institute, Rez, 250 68, Czech Republic
2 Department of Solid State Engineering, Institute of Chemical Technology in Prague, Prague, 166 28, Czech Republic
Nanoscale Research Letters 2012, 7:241 doi:10.1186/1556-276X-7-241Published: 6 May 2012
Extremely thin gold layers were sputter deposited on glass and silicon substrates, and their thickness and morphology were studied by Rutherford backscattering (RBS) and atomic force microscopy (AFM) methods. The deposited layers change from discontinuous to continuous ones for longer deposition times. While the deposition rate on the silicon substrate is constant, nearly independent on the layer thickness, the rate on the glass substrate increases with increasing layer thickness. The observed dependence can be explained by a simple kinetic model, taking into account different sticking probabilities of gold atoms on a bare glass substrate and regions with gold coverage. Detailed analysis of the shape of the RBS gold signal shows that in the initial stages of the deposition, the gold layers on the glass substrate consist of gold islands with significantly different thicknesses. These findings were confirmed by AFM measurements, too. Gold coverage of the silicon substrate is rather homogeneous, consisting of tiny gold grains, but a pronounced worm-like structure is formed for the layer thickness at electrical continuity threshold. On the glass substrate, the gold clusters of different sizes are clearly observed. For later deposition stages, a clear tendency of the gold atoms to aggregate into larger clusters of approximately the same size is observed. At later deposition stages, gold clusters of up to 100 nm in diameter are formed.