SpringerOpen Newsletter

Receive periodic news and updates relating to SpringerOpen.

Open Access Open Badges Nano Express

Fabrication of one-dimensional Ag/multiwalled carbon nanotube nano-composite

Yitian Peng1 and Quanfang Chen2*

Author Affiliations

1 Jiangsu Key Laboratory of Design and Manufacture of Micro/Nano Biomedical Instrument, School of Mechanical Engineering, Southeast University, Nanjing, 211189, China

2 MEMS and Nanomaterials Lab, Mechanical, Materials and Aerospace Engineering Department, University of Central Florida, Orlando, FL, 32816-2450, USA

For all author emails, please log on.

Nanoscale Research Letters 2012, 7:195  doi:10.1186/1556-276X-7-195

The electronic version of this article is the complete one and can be found online at: http://www.nanoscalereslett.com/content/7/1/195

Received:13 August 2011
Accepted:23 March 2012
Published:23 March 2012

© 2012 Peng and Chen; licensee Springer.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


Composite made of multiwalled carbon nanotubes coated with silver was fabricated by an electroless deposition process. The thickness of silver layer is about 40 to 60 nm, characterized as nano-crystalline with (111) crystal orientation along the nanotube's axial direction. The characterization of silver/carbon nanotube [Ag/CNT] nanowire has shown the large current carrying capability, and the electric conductivity is similar to the pure silver nanowires that Ag/CNT would be promising as building blocks for integrated circuits.

PACS: 81.05.uj, carbon nanotubes, carbon-based materials, diamond/nanocarbon composites.

multiwalled carbon nanotube; silver composite; electroless deposition; resistance

Nano Express

One-dimensional nanostructured metals play important roles as interconnects and nanoscale electronic devices. Silver nanowire is especially attractive due to its extremely high electric and thermal conductivities [1]. Template-directed synthesis and the solution-phase based approach have been widely used to produce Ag nanowires [2-4]. However, pure silver nanowires are limited for metallic interconnection applications as its resistivity increase largely with the dimension decreasing due to its increased electron scattering. On the other hand, carbon nanotubes [CNTs] are known for having long mean free path (order of several microns), extremely high current densities (> 109 A/cm2 at 25°C), and high aspect ratio. The bulk composites made of metal matrix with CNTs as the reinforcement component for augmenting the metal conductivity have been extensively investigated [5-7]. However, how to fabricate and to characterize a single one-dimensional nano-composite with embedding a single CNT within the silver matrix are difficult [8,9], and electroless silver plating process has been used to deposit silver onto multiwalled carbon nanotube [MWCNT] [10]. In this paper, one-dimensional Ag/MWCNT nano-composite was prepared by coating the MWCNT with relatively uniform nano-crystalline silver layer using the electroless silver plating process. The electrical properties of one-dimensional Ag/MWCNT nano-composite were investigated using two terminal conductance measurements to demonstrate the resistivity and the current carrying capacity.


The MWCNTs used in our study were prepared by chemical vapor deposition process. The dimension of the MWCNTs is 3 to 15 μm long and the diameter ranges from 40 to 60 nm. The one-dimensional Ag/MWCNT nano-composites were fabricated using an electroless silver plating process [10-13] (see Additional file 1). Figure 1a shows that the relatively uniform and continuous silver layer was coated on MWCNT. Figure 1b reveals that the composition of the Ag/MWCNT nano-composite includes C, Si, and Ag. Silicon is from the silicon substrate. The contents of silver and carbon confirm the silver coating on the MWCNT.

Additional file 1. Support 1: Fabrication of one-dimensional Ag/Multi-walled carbon nanotube nanocomposite. Details of frbrication proicess is provided.

Format: DOC Size: 48KB Download file

This file can be viewed with: Microsoft Word ViewerOpen Data

thumbnailFigure 1. Images of Ag/MWCNT taken by different imaging devices. (a) Scanning electron microscope [SEM] image of a Ag/MWCNT that the MWCNT is completely covered by silver layer. (b) Energy-dispersive X-ray spectroscopy spectra of the Ag/MWCNT that no oxygen can be identified. (c) SAED pattern shows a multicrystal structure in Ag/MWCNT nanowire (d) HRTEM of the silver coated onto a MWCNT of the Ag/MWCNT nanocomposite. Arrows show the crystal orientation.

Results and discussion

Transmission electron microscopy observation shows that the one-dimensional Ag/MWCNT nano-composite has a relatively uniform silver coverage as shown in Figure 1a. The diameter is about 160 nm, with a deviation of about 20 nm, and the length is about 3.2 μm. The inset of Figure 1c is the selected area electron diffraction [SAED] pattern obtained from a massive bundle of one-dimensional Ag/silver nano-composites. Several continued rings and some diffraction spots that were observed in the SAED pattern indicate that the Ag/MWCNT nano-composites have a polycrystalline structure.

The distances of the lattice planes are measured using a high-resolution transmission electron microscopy [HRTEM] and shown in Figure 1d. Interplanar distance of the (111) planes which is 0.234 nm indicates that the nano-crystal silver coating possesses a face-centered cubic [FCC] structure, which are consistent with the standard lattice constant of the Ag crystal structure [14]. Lattice fringes with spacing of 0.2046 nm which are also observed corresponds to the (200) planes in FCC crystalline silver. It can be seen that the silver coating layer is nano-crystallized without any amorphous structure [15].

Figure 2 gives the X-ray diffraction [XRD] patterns of the nano-crystalline Ag/MWCNT nano-composites. One weak peak at about 2θ = 26.00 is from MWCNTs and the peaks at 38.2°, 44.3°, 64.4° and 77.4° can be assigned, respectively, to <111>, <200>, <220>, and <311> crystalline planes of the silver coating. It is consistent with the crystalline silver measured in HRTEM. It is further observed that the nano-crystalline silver coating has a strong (111) orientation along the nanotube's axial direction because the specific free energy of silver is minimum on (111) planes of the face center cubic structure [16].

thumbnailFigure 2. XRD patterns of one-dimensional Ag/MWCNT nano-composite.

A single, one-dimensional nano-crystalline Ag/MWCNT nano-composite wire was placed onto an electrically isolated wafer substrate, and two electrodes were made by liftoff (10 nm Cr/170 nm Au), as shown in Figure 3 (left). The gap between the two electrodes is about 500 nm and the diameter of the nano-crystalline Ag/MWCNT nano-composite is about 160 nm. Resultant electric currents were recorded under applied bias voltages, ranging from -100 to 100 mV, to the two electrodes.

thumbnailFigure 3. SEM image of the setup of electrical characterization. Inset is the magnified image of the connection (left) and the I-V curve of Ag/MWCNT nano-composite wire. The straight line indicates a resistive nature, and no semiconductive characteristics as in silver oxide can be identified.

Figure 3 (right) displays the typical linear I-V curves measured on the single, one-dimensional nanocrystalline Ag/MWCNT nano-composite wire at room temperature. More than five measurements were carried out on the sample. The resistance was calculated (based on the applied voltages and the resultant currents). The average resistance of the Ag/MWCNT is at about 75.7 Ω, and the variation among different measurements is less than 2%. Therefore, the resistivity of the one-dimensional Ag/MWCNT nano-composite is approximately 3.0 × 10-6 Ωm. It is reasonable that the resistivity of the nanocrystalline Ag/MWCNT nano-composite is higher than the bulk silver (1.5 × 10-8 Ωm) because the surface scattering of electron increases largely when the diameter is as smaller as the mean free path of the silver [16]. Since the I-V curve is a straight line, therefore, no oxidation effects can be identified. This also agrees with the composition analysis in which no oxygen was detected. It was indicated that the resistivity of a DNA-templated silver nanowire measured by SH Park et al. was about 4 × 10-6 Ωm [17]. It can be deduced that the one-dimensional Ag/MWCNT nano-composites have better conductivity than the DNA-coated silver nanowire. However, the resistivity of Ag/MWCNT nanowire is greater than that of a pure single crystal silver nanowire which has the resistivity of about 1.87 × 10-6 Ωm [15]. The increased resistivity of Ag/MWCNT could be due to the multigrained structure as well as the contact resistance as well. Based on the free electron theory, the electric conductivity of metallic conductors can be described as [5,18]: <a onClick="popup('http://www.nanoscalereslett.com/content/7/1/195/mathml/M1','MathML',630,470);return false;" target="_blank" href="http://www.nanoscalereslett.com/content/7/1/195/mathml/M1">View MathML</a> through the free electron gas theory [5], where n is the electron density of state, <a onClick="popup('http://www.nanoscalereslett.com/content/7/1/195/mathml/M2','MathML',630,470);return false;" target="_blank" href="http://www.nanoscalereslett.com/content/7/1/195/mathml/M2">View MathML</a> is the mean free path, me is the mass of electron and VF is the Fermi velocity. The electrical conductivity is proportional to the mean free path, i.e., the longer the mean free path, the higher the conductivity will be. The silver coating on the sidewalls of MWCNTs forms composite couplings to electronic states through the charge transfer interaction from the silver ions to MWCNTs [19]. The metallic MWCNTs can be ballistic conductors and have a mean free path of 0.5 μm equaling with the length of the tube [2]. The embedding MWCNT in a silver matrix facilitates electron transfer along with the ballistic transport from end to end, thereby prolonging the electron's mean free path of nano-composite ten times of the silver [20]. The low resistivity of one-dimensional Ag/MWCNT nano-composite silver nanowire can attribute to the longer mean free path of MWCNT. The current density t was calculated to be about 6.56 × 107 A/cm2 at the voltage of 100 mV through the t = I/S, where S is the cross sectional area and I is the current. The current can be kept stable during the 20 min measurement under the constant voltage of 100 mV. Since electromigration occurring in Ag interconnects at the current density of 106 to 107A/cm2 [21], and the metallic MWCNT can stand electric current density (along axis) more than 1,000 times greater than that of silver; therefore, it is clear that integration of MWCNTs in nano-composites would be good to counter electromigration.


As a summary, MWCNTs coated with about 40 to 60 nm of relatively uniform and continuous nano-crystalline silver layer were fabricated using an electroless silver plating process. The two-terminal I-V electrical measurements conducted have demonstrated that the one-dimensional nano-crystalline Ag/MWCNT nano-composite has low resistivity and high current carrying capacity at room temperature. The electrical conductivity of MWCNTs has been enhanced by depositing pure crystal silver on their surface, and the maximum current carrying capacity of silver have been enhanced by embedding with MWCNT. Therefore, the one-dimensional nano-crystalline Ag/MWCNT nano-composite wires are promising to be used as interconnects in the area of nanoelectronic device.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

QC has initiated the concept and awarded as PI by NSF to support this work. YP was recruited and supervised to conduct the experimental work. YP continued the work later after joining the current institution. All authors read and approved the final manuscript.


This work was supported by the Natural Science Foundation of USA and Natural Science Foundation of China (grant no. 51002030). YP also acknowledges the financial support from Southeast University for excellent young faculty.


  1. Hong BH, Bae SC, Lee CW: Ultrathin single-crystalline silver nanowire arrays formed in an ambient solution phase.

    Science 2001, 294:348. PubMed Abstract | Publisher Full Text OpenURL

  2. Yang R, Sui CH, Gong J, Qu LY: Single-crystal silver nanowires: preparation and surface-enhanced Raman scattering (SERS) property.

    Mater Lett 2007, 61:900. Publisher Full Text OpenURL

  3. Barbic M, Mock JJ, Smith DR, Schultz S: Single crystal silver nanowires prepared by the metal amplification method.

    J Appl Phys 2002, 91:9341. Publisher Full Text OpenURL

  4. Choi JS, Sauer GD, Nielsch K, Wehrspohn RB, Gsele U: Hexagonally arranged monodisperse silver nanowires with adjustable diameter and high aspect ratio.

    Chem Mater 2003, 15:776. Publisher Full Text OpenURL

  5. Hjortstam O, Oderholm SS, Dai H: Can we achieve ultra-low resistivity in carbon nanotube-based metal composites?

    Appl Phys A 2004, 78:1175. Publisher Full Text OpenURL

  6. Feng Y, Yuan HL, Zhang M: Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes.

    Mater Charariz 2005, 55:211. Publisher Full Text OpenURL

  7. Chen XH, Xia JT, Peng JC, Li WZ, Xie SS: Carbon-nanotube metal-matrix composites prepared by electroless plating.

    Comp Sci & Tech 2000, 60:301. PubMed Abstract | Publisher Full Text OpenURL

  8. Peng YT, Chen QF: The synthesis of a copper/multi-walled carbon nanotube hybrid nanowire in a microfluidic reactor.

    Nanotechnology 2009, 20:235606. PubMed Abstract | Publisher Full Text OpenURL

  9. Jankovic LB, Gournis DM, Trikalitis PN: Carbon nanotubes encapsulating superconducting single-crystalline tin nanowires.

    Nano Lett 2006, 6:1131. PubMed Abstract | Publisher Full Text OpenURL

  10. Qiu LH, Pol VG, Wei Y, Gedanken AH: Sonochemical decoration of multi-walled carbon nanotubes with nanocrystalline tin.

    New J Chem 2004, 28:1056. Publisher Full Text OpenURL

  11. Feng Y, Yuan HL: Electroless plating of carbon nanotubes with silver.

    J Mater Sci 2004, 39:3241. OpenURL

  12. Peng YT, Hu YZ, Wang H: Tribological behaviors of surfactant-functionalized carbon nanotubes as lubricant additive in water.

    Tribo Lett 2007, 25:247. Publisher Full Text OpenURL

  13. American Electroplaters and Surface Finishers Society: The fundamental aspects of electroless nickel plating. In Electroless Plating Fundamentals and Applications. Edited by Mallory GO, Hajdu JB. New York: Noyes Publications/William Andrew Publishing; 1990. OpenURL

  14. Bhattacharyya S, Saha SK: Silver nanowires grown in the pores of a silica gel.

    Appl Phys Lett 2000, 77:3770. Publisher Full Text OpenURL

  15. Huang Q, Lilley CM, Bode M: An in situ investigation of electromigration in Cu nanowires.

    Appl Phys Lett 2009, 95:103112. Publisher Full Text OpenURL

  16. Liu SW, Wehmschulte RJ, Lian GD, Burb CM: Room temperature synthesis of silver nanowires from tabular silver bromide crystals in the presence of gelatin.

    J Sol Sta Chem 2006, 179:696. Publisher Full Text OpenURL

  17. Park SH, Prior MW, Thomas H, LaBean : Optimized fabrication and electrical analysis of silver nanowires templated on DNA molecules.

    Appl Phys Lett 2006, 89:033901. Publisher Full Text OpenURL

  18. Kittel C: Introduction to Solid State Physics. Sixth edition. New York: Wiley; 1986. OpenURL

  19. Fujimori MS, Heike SJ, Hashizume TH: Electrical conduction of Ag nanowire fabricated on hydrogen-terminated Si(100) surface.

    J J Appl Phys 2006, 45:2184. OpenURL

  20. Andriotis AN, Menon M, Froudakis GE: Various bonding configurations of transition-metal atoms on carbon nanotubes: their effect on contact resistance.

    Appl Phys Lett 2000, 76:3890-3892. Publisher Full Text OpenURL

  21. Yoshimoto S, Murata Y, Hobara R, Matsuda I, Kishida M, Konishi H, Ikuno T, Maeda D, Yasuda T, Honda S, Okado H, Oura K, Katayama M, Hasegawa S: Electrical characterization of metal-coated carbon nanotube tips.

    J J Appl Phys 2005, 44:L1563. OpenURL