Open Access Highly Accessed Nano Express

Gold nanoparticles supported on magnesium oxide for CO oxidation

Sónia AC Carabineiro1*, Nina Bogdanchikova2, Alexey Pestryakov3, Pedro B Tavares4, Lisete SG Fernandes4 and José L Figueiredo1

Author affiliations

1 Laboratório de Catálise e Materiais, Departamento de Engenharia Química, Faculdade de Engenharia, Universidade do Porto, 4200-465 Porto, Portugal

2 Universidad Nacional Autónoma de México, Centro de Nanociencias y Nanotecnología, Carretera Tijuana-Ensenada, 22800 Ensenada, Baja California, Mexico

3 Tomsk Polytechnic University, 30, Lenin Avenue, Tomsk 634050, Russia

4 Universidade de Trás-os-Montes e Alto Douro, CQVR Centro de Química-Vila Real, Departamento de Química, 5001-911 Vila Real, Portugal

For all author emails, please log on.

Citation and License

Nanoscale Research Letters 2011, 6:435  doi:10.1186/1556-276X-6-435

Published: 22 June 2011


Au was loaded (1 wt%) on a commercial MgO support by three different methods: double impregnation, liquid-phase reductive deposition and ultrasonication. Samples were characterised by adsorption of N2 at -96°C, temperature-programmed reduction, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction. Upon loading with Au, MgO changed into Mg(OH)2 (the hydroxide was most likely formed by reaction with water, in which the gold precursor was dissolved). The size range for gold nanoparticles was 2-12 nm for the DIM method and 3-15 nm for LPRD and US. The average size of gold particles was 5.4 nm for DIM and larger than 6.5 for the other methods. CO oxidation was used as a test reaction to compare the catalytic activity. The best results were obtained with the DIM method, followed by LPRD and US. This can be explained in terms of the nanoparticle size, well known to determine the catalytic activity of gold catalysts.