SpringerOpen Newsletter

Receive periodic news and updates relating to SpringerOpen.

This article is part of the series Micro&Nano2010: Special Symposium on Nanomaterials for sensing and energy harvesting devices.

Open Access Nano Idea

Designing novel Sn-Bi, Si-C and Ge-C nanostructures, using simple theoretical chemical similarities

Aristides D Zdetsis

Author affiliations

Department of Physics University of Patras, GR 26500, Patra, Greece

Citation and License

Nanoscale Research Letters 2011, 6:362  doi:10.1186/1556-276X-6-362

The electronic version of this article is the complete one and can be found online at: http://www.nanoscalereslett.com/content/6/1/362


Received:24 December 2010
Accepted:27 April 2011
Published:27 April 2011

© 2011 Zdetsis; licensee Springer.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

A framework of simple, transparent and powerful concepts is presented which is based on isoelectronic (or isovalent) principles, analogies, regularities and similarities. These analogies could be considered as conceptual extensions of the periodical table of the elements, assuming that two atoms or molecules having the same number of valence electrons would be expected to have similar or homologous properties. In addition, such similar moieties should be able, in principle, to replace each other in more complex structures and nanocomposites. This is only partly true and only occurs under certain conditions which are investigated and reviewed here. When successful, these concepts are very powerful and transparent, leading to a large variety of nanomaterials based on Si and other group 14 elements, similar to well known and well studied analogous materials based on boron and carbon. Such nanomaterias designed in silico include, among many others, Si-C, Sn-Bi, Si-C and Ge-C clusters, rings, nanowheels, nanorodes, nanocages and multidecker sandwiches, as well as silicon planar rings and fullerenes similar to the analogous sp2 bonding carbon structures. It is shown that this pedagogically simple and transparent framework can lead to an endless variety of novel and functional nanomaterials with important potential applications in nanotechnology, nanomedicine and nanobiology. Some of the so called predicted structures have been already synthesized, not necessarily with the same rational and motivation. Finally, it is anticipated that such powerful and transparent rules and analogies, in addition to their predictive power, could also lead to far-reaching interpretations and a deeper understanding of already known results and information.

Background

There are several very powerful, general and fruitful concepts in physics and chemistry which are, at the same time, miraculously simple and highly efficient for the molecular engineering and design of functional and functionalizable nanomaterials and nanosystems. Such transparent and powerful concepts are based on isoelectronic (or isovalent) analogies, regularities and similarities, of which the periodical table of the elements is the best, simplest and most celebrated example. The periodical table constitutes a global regularity. Another much less known global regularity is illustrated in Figure 1 that shows the main part of an older version of the periodical table which includes only the main group elements without the d-block and the f-block elements. If we draw a diagonal in the table in Figure 1 we can see that all (or most) elements below the diagonal are metals and that the elements above the diagonal are non-metals [1]. An elementary explanation is that the elements on the left have only a few valence electrons which they can easily loose, whereas elements on the bottom have several inner shells of electrons which screen up and weaken the nuclear attraction to the valence electrons and which can, therefore, escape easily into the (free) electron sea.

thumbnailFigure 1. The periodical table of the main group elements. The diagonal line roughly separates metals and non-metals.

Similarly, there is another global diagonal relationship between elements (composed mainly of the third and second periods) which demands that diagonally adjacent elements (primarily of the second and third periods) have similar properties (in particular those related to size and electronegativity) [2,3]. The size of the atoms decreases when moving across a period of the periodic table and increases when moving down a group. Likewise, the electronegativity increases when moving across a period and the elements become progressively more covalent and more electronegative. On moving down a group, the elements become more ionic and less electronegative. Thus, crossing and descending the periodic table have opposite effects on these properties, cancelling out for diagonal pairs of elements such as B and Si (for instance, boron and silicon are both semiconductors). Similarly, and in addition to the diagonal relationship there is an obvious vertical relation between elements of the same column of the periodical table (groups) which have the same number of valence electrons and similar (more or less) chemical properties. Yet, as we descend down a group, there are systematic and regular differences, described by the well known inert pair effect [2-5] - that is, the increasing stability of oxidation states that are two less than the group valency, for heavier elements of the group. It can be also described as the resistance to losing the s-electron in the valence shell (for the group 13, 14 and 15 elements). This is a relativistic effect which is due to the better penetration of the s-valence electrons to the nucleus compared to p-electrons [2-5].

In addition to such global regularities, there could be other local analogies which are also based on the number of valence electrons. In general, it would be expected that two atoms or molecules having the same number of valence electrons (isovalent) should have similar properties and should, in principle, be able to replace each other in larger complex structures and nanocomposites. Such a local diagonal relationship between boron and silicon can be invoked by recognizing that, basically, one B-H unit has the same number (four) of valence electrons (is isovalent) with Si. We could then assume that, under certain conditions to be specified later, we could replace a B-H unit in a boron hydride molecule by Si and still have a stable molecule. We could also expect that the reverse could be also true but we will not consider it here. Let us write the above relation as BH→Si (1). It is clear that isovalency, although necessary, is not sufficient for such equivalence or replacement relationships. For instance, we cannot write Si→C in general. In addition, the relationship BH→C does not work either. Experience shows that we could, instead, have BH1-→CH (2). This is a horizontal relation involving five valence electrons. The relation (CH)→(SiH) (3) also seems to works as C20H20 or C60H60 fulleranes are very similar to Si20H20 or Si60H60 fullerens [6-9]. Relation (3) could be also written as (CH4)→(SiH4) (3') to indicate the equivalence covalent (sp3 bonded structures). Moreover, since Si, Ge, Sn and Pb are in the same column of the periodical table, we could, in principle, write: Si→Ge→Sn→Pb (4), bearing in mind the inert pair effect, although it is clear that Si and Pb are not similar. However, it is not unreasonable to expect that (BH)→Ge, (BH)→Sn, (BH)→Pb (5) would work as a total substitution (which is roughly correct). Relation (5) involves four valence electrons. As in relation (2), which involves five valence electrons, we can write more five-valence electron relations as: BH1-→CH→P, BH1-→CH→As (6) or BH1-→CH→Sb, BH1-→CH→Bi (7), involving the group 15 elements. Relations (1) and (2) [10-16] and analogy (3) [6-9] have been successfully tested. The author has also tested CH→Si1- (14) which has lead to a simple rule of thumb for constructing planar aromatic Si structures similar to benzene and others [17-19]. This rule, suggested by Zdetsis, has been also tested and verified by Jin et al. [20]. Finally, analogies (4) through (7) have been demonstrated to be valid by the author [21-24]. Thus, in this study, the working area of the periodic table will be as in Figure 2. Even within this limited region of the periodical table, it is difficult to identify similar or homologous molecular systems.

thumbnailFigure 2. The region of the periodical table examined here. Different colours of diagonal lines and element symbols signify different type or level of (co)relation.

The obvious questions are how could one know beforehand which of the many conceivable similarities (or equivalence relations) are valid (or working) and what is the criterion or criteria?

A natural, but incomplete, answer should certainly depend on chemical (and physical) intuition and plain common sense, although sometimes in science common sense has lead to wrong conclusions. This approach suggests that not only the number of valence electrons but also the type of bonding (hybridization, relative magnitude) should be important for such similarities. For instance, carbon in diamond and crystalline silicon have similar properties because they are both sp3 bonded through strong covalent bonds. In such a case the replacement Si→C is valid but not in the case of graphite (which is sp2 bonded) or benzene (which is aromatically bonded). In this case we can derive the rule CH→Si1- (8), by noting that the Si66- multianion has a planar hexagonal structure similar to benzene (C6H6) [17,18],from which it follows that Si66-→C6H6 or CH→Si1- (8). Both of these relations are isovalent (involve the same number of valence electrons and can be realized [17,18] by placing lithium counter-ions in suitable positions. This has been known as the Si6Li6→C6H6 (9) replacement rule of thumb. Such bonding properties are reflected in the structure, symmetry and occupation of the frontier orbitals through which these simple ideas can be strictly formalized, classified and theoretically implemented. Analogous ideas have been applied for the silicon and carbon fullerenes [6-9] which are similar because they are similarly sp3 bonded (not sp2 as in the real carbon fullerenes). Such a formulation has lead to the isolobal principle (analogy) [25]. The isolobal analogy was introduced about 30 years ago by Hoffman [25] in order to allow the correlation of seemingly very different chemical species, such as organic hydrocarbon fragments, with transition metal ligands. Two fragments are isolobal if the number, symmetry properties, approximate energy and shape of the frontier orbitals, as well as the number of electrons in them, are similar (but not identical). Although it seems strange, CH, Co(CO)3 or NH3, Co(CO)4 can be considered as classical examples of pairs of isolobal fragments. Closer examination reveals that all these fragments need the same number of missing electrons in order to reach a stable electronic configuration. For example, CH has five valence electrons and, therefore, it needs three more to reach the stable configuration of eight. Likewise, Co(CO)3 which has 15 valence electrons misses the stable configuration of 18 by three electrons. These fragments or building blocks can replace each other in more complex structures and can combine to form ordinary bonds.

The isolobal analogy allows us to relate and compare organic, inorganic and/or organometallic compounds on a uniform basis. Inversely, if we can find molecular fragments or building blocks that can replace each other in complex structures, we can conclude that they are isolobal. Therefore, the best way to examine and validate any (local) chemical similarity, discovered by chemical intuition and/or general concepts (based on isoelectronic or isovalent analogies) is the scheme demanded by the isolobal principle. The replacement BH→Si (1) and most of the analogies (1)-(7) involving (directly or indirectly) boron are special cases of a more general isolobal analogy which the author, scoptically and synoptically, has termed 'the boron connection'. This analogy provides a mechanism to predict new, hopefully stable, molecules and to compare molecular fragments with each other and with familiar species from organic chemistry and also offers clues about reactivity and reaction mechanisms. The boron connection is an attempt to map the structural chemistry of boranes and carboranes [26-31] to the structural chemistry of silicon [32] and silicon-carbon clusters, respectively. Boranes and carboranes constitute a very rich and well-established branch of chemistry with well-known structural and stability rules and powerful concepts [26-30]. Since boranes and borane-based molecular fragments and nano composites - including carboranes, bisboranes and metallaboranes - and metallacarboranes are very well studied [26-31,33-35] and are very well known species with many technological, chemical and biomedical [33,34] applications, their silicon, silicon-carbon (and other group 14, and 15) analogues [35,36] are expected to be very important and very promising for analogous applications.

It should be emphasized that not all of the similarities and results obtained were initially conceived as such but they have later been unified, classified and generalized within the framework and the scope of the present work. Clearly, not all the results presented here are reviews of earlier work. Several totally new results and predictions have been obtained here.

Results and discussion

The boron connection for Si and Si-C structures

The BH→Si boron connection has originated from the fluxionality and similarity of magic silicon clusters (and, in particular, of the controversial Si6 cluster [11-13]) with the corresponding deltahedral boranes. It was shown initially [11,12] that the Si62- dianion and the corresponding isovalent B6H62- borane have exactly the same geometrical and electronic structure (including the frontier orbitals) as shown in Figure 3 and they are, therefore, isolobal and homologous. Furthermore, through the BH1-→CH (2) or 2BH1-→ 2CH substitution, the validity of which is established through the synthesis and stability of the well-known C2B4H6 (and, in general, of C2Bn-2Hn) carborane, we can assume the isolobal equivalence Sin-2C2H2⇔C2Bn-2Hn (10) between neutral hydrogenated silicon carbon clusters and deltahedral carboranes [10-15]. The same is true for Sin-4C4H4 clusters and C4Bn-4Hn carboranes (namely Sin-4C4H4⇔C4Bn-4Hn), as illustrated schematically in Figure 4. Applying the isolobal analogy (10) to existing organometallic multidecker sandwiches [30-33] we have designed (in-silico) analogous organometallic silicon- carbon sandwiches[16] which, as shown in Figure 5, are fully homologous (isolobal) to the carborane prototypes and are, therefore, expected to have similar chemical and technological properties. Apparently similar results should be able to be obtained for germanium-based multidecker sandwiches, since Si and Ge structures are fully homologous and isolobal and the Si→Ge substitution rule is valid almost everywhere. This is equivalent to the BH→Ge substitution, which seems to be more valid compared to the BH→Si substitution, in particular for larger clusters [12,13]. This is related to the fact that the BH→Si (1) is based on the much stronger BH2-→Si2- substitution between dianions [10,11] from which the equivalence Sin-2C2H2⇔C2Bn-2Hn is obtained by the well-tested substitutions Si1-→CH and BH1-→CH, respectively. It is the BH2-→Ge2- relation which is much more valid when compared to the BH2-→Si2, mainly due to the inert pair effect [14,15]. For exactly the same reason, as we go down the 14th column of the periodical table (see Figure 2), the BH2-→Sn2- relation is even more valid than the BH2-→Ge2-, which is verified experimentally by the recent synthesis of stannaspherene, Sn122- (see Discussion section) [14,15,22].

thumbnailFigure 3. Schematic illustration of the original boron connection between dianions. Isolobal analogy of Si62- dianion and the B6H62- borane.

thumbnailFigure 4. Schematic illustration of the SiC- extended boron connection. Isolobal analogy of Sin2-, (BnHn) 2-, Sin-2C2H2, C2Bn-2Hn, including the Sin-4C4H4 and C4Bn-4Hn similarity.

thumbnailFigure 5. Illustrating the isolobal analogy of multidecker sandwiches. Comparison of the HOMO orbitals of Si-C and B-C multidecker sandwiches.

In addition, Hawthorne and collaborators [34,35] have designed and synthesized special carborodes made of chains of icosahedral carboranes interconnected to each other, as shown in Figure 6b, for biomedical applications as drug delivery and radiolabelling agents. The corresponding isostructural and isolobal Si-C nanorods, shown in Figure 6a, are expected to have similar properties and capabilities. The added advantage of such systems, which are based in organosilicon chemistry in analogy to organoboron chemistry, is the lower toxicity and expected higher biocompatibility [35] and biodegradability [36] of silicon. In addition, the possibility for the integration of the diagnostic and therapeutic tools with the current micro- and nano-electronic tools and infrastructure based in silicon technology is very appealing. Such a possibility was first suggested by Zdetsis [22,23]. Finally, it has been shown that each separate unit of the Si-C nanorodes, after the removal of the apical hydrogen atoms, can exist as a separate, independent unit in a form of a nanowheel, similar to the B-C wheel-shaped structures [37,38]. As a test for the predictive power of the boron connection scheme, we have, in parallel to the current investigation, started a search for such Si-C based nanowheels which has been successfully finalized [38]. This is highly suggestive of the endless variety of molecular engineering possibilities of such simple-looking analogies.

thumbnailFigure 6. Comparison of silicon-carbon and boron carbon nanorods. (a) Si-C and (b) B-C nanorods.

The boron connection for Sn, Bi and Sn-Bi structures

The equivalent isoelectronic relations rules BH→Sn and BH1-→Bi. could be also considered in a similar way to the BH→Si and BH1-→CH rules: The latter analogy is effective in the synthesis of bisboranes, while the former is based on the equivalence of Si and Sn (belonging to the same group) and the boron connection. Such equivalence, as shown in Figure 7, was verified by the recent synthesis of the Sn122- dianion, the stannaspherene [21,39]. Through the stannaspherene synthesis, the possibility of forming functional nanostructures similar to hydrogenated silicon carbon nanorods and carborods is highly enhanced. The nanorods shown in Figure 8 are very stable (high binding energies) and homologous to each other. In addition, due to the formal equivalence of CH and SiH (in cases of sp3 bonding), we can assume the BH1-→CH→SiH replacement and examine the possibility of bifullerenes such as Bi20, in a similar manner to the corresponding C20H20 or Si20H20 fullerenes. As shown in Figure 9, the two types of fullerens are fully isolobal, which is highly suggestive that such bismuth cages could be eventually synthesized [40]. Moreover, since Si1- ions (or P atoms) are very popular doppands of C20H20 cages, forming Si1-@C20H20 or P@C20H20 embedded cages, we could expect that Bi@Bi20 cages would also be stable and isolobal to Si1-@C20H20. This is indeed the case [23]. Similar results have been obtained for P20, P@P20 or P@Bi20 cages, and so on [23]. It is further predicted and anticipated that nanostructures involving other elements or other combinations of group 14 and group 15 elements could, in principle, be realizable within the reservations expressed above (for example between C and Si) and the limitations due to the inert pair effect [10-15].

thumbnailFigure 7. Schematic illustration of the CH → Bi/BH → Sn analogy. Correspondence of stannaspherene (Sn12)2- with (B12H12)2- and analogous bismuth functionalized structures.

thumbnailFigure 8. Comparison of a larger verity of nanorods involving group 15 elements. Si-C, Sn-Bi, and SN-C-Bi functionalized nanorods.

thumbnailFigure 9. Illustration of the Bi/C fullerenes analogy. Comparison and analogy in geometrical and electronic structure of C20H20 and Bi20 fullerenes.

(CH)→(SiH) or (CH4)→(SiH4) substitution: Si fullerenes

The C20H20 or C60H60 hydrogenated fullerenes (or fulleranes), unlike the bare C20 and C60 cages, are sp3 bonded and, therefore, homologous Si20H20 or Si60H60 fullerenes should, in principle, be stable and isolobal to C20H20 or C60H60 [40] and this is, indeed, valid. Silicon fullerenes on the basis of their binding energies are, in fact, very stable [6-9,40] and isolobal to the corresponding isovalent carbon fulleranes, as is indicated in Figure 10.

thumbnailFigure 10. An illustration of the Si and C fullerenes analogy. Comparison and analogy in geometrical and electronic structure of C20H20 and Si20H20 fullerenes.

The CH→Si1- or CH→Si1-Li1+ rule of thumb: planar aromatic silicon rings

As explained earlier, for the planar aromatic carbon rings, the corresponding planar Si structures are obtained from the SILI rule of thumb [17-20], as illustrated in Figure 11. The resulting structure in Figure 11, is very stable (not necessarily the global minimum structure), aromatic [17-19] and fully isolobal to benzene as is shown in Figure 12. It is interesting to observe that, in this case, although isolobal, the two rings are not isostructural (they do not have the same structure and symmetry [17,18]. Furthermore, following this rule of thumb suggested by the present author [17,18], Jin and Liu [20] have recently designed larger planar rings (analogous to naphthalene or coronene). Such rings are both stable (high binding energies, real frequencies) and aromatic, which is very promising for a possible future synthesis of such planar Si structures.

thumbnailFigure 11. An illustration of the CH/SiLi analogy for planar aromatic Si-based structures. Top and bottom views of the planar Si6Li6 aromatic structure similar to benzene.

thumbnailFigure 12. Comparison of the electronic structure of Si6Li6 and benzene. Comparison of the frontier orbitals of Si6Li6 and Benzene, showing the isolobal analogy between the two.

Other possible applications and implications in nano-medicine and biology

In this work we have been mainly concerned with total substitutions of the form BH→Si, Si→C, Si→Sn, BH1-→CH, and CH→Bi and others. However, partial substitutions could be as (or even more) useful as total substitutions. Such partial substitutions, which have not so far been investigated or tested (and, thus, constitute new global predictions of the current paper) could be very useful in medical and pharmaceutical applications, such as drug delivery, radioimaging and radiolabelling, among others. The building blocks of such functionalized nanosystems are borane ions, carboranes, metallacarboranes, metallaboranes and other heteroatom derivatives or combinations. For example, mixed BHC and SiC nanorods, obtained by partial (not total) BH→Si substation in the model systems discussed above, should be able to be used for radiolabelling by iodination or tritiation, respectively, as described by Hawthhome and Maderna [33,34]. Such a possibility has recently been successfully explored [41] with very promising preliminary results. In all these analogous material symmetry is very important and should be taken into account, provided there are additional tests to verify that no imaginary frequency modes occur, leading unavoidable to distortions (as in the case of Si122-).

Finally, the recent (well after this work was finalized) discovery of A Bacterium That Can Grow by Using Arsenic Instead of Phosphorus by Wolfe-Simon et al. [42], indicates that such rather simple and 'innocent' isovalent (or isolobal) substations used throughout this work, could have very far-reaching implications in many branches of science and technology.

Conclusions

It has been illustrated that chemical intuition supported by rather simple and transparent, but very powerful techniques, can form a general scheme or framework leading to molecular engineering and theoretical design of very important and functional nanomaterials and nanostructures based on silicon, carbon and other group14 and group 15 elements. It has been also illustrated that the framework presented here, in addition to the older and newer predictions (some of which have been already tested and/or materialized), could lead to very far-reaching implications and applications in many branches of science and technology, including nanomedicine and molecular biology.

Yet, its implementation is not always unique or straightforward, due to many alternative misleading routes. Chemical (and physical) intuition is always very important. Apparently, the same scheme, based on observed and well-defined properties of one category of materials should be able to predict and design analogous materials, with similar chemical properties for a (seemingly) different category of structures. We have restricted our attention to group 14 (and group 15) elements and structures (based on well-defined properties of group 13 elements and, in particular, boron) due to the high technological importance of silicon and carbon (and the other connected elements and fragments). Even within this limited range of the periodical table (illustrated in Figure 2), the possibilities are endless and the possible routes unlimited. Hopefully, the scheme presented here should be able to guide the search, the theoretical design and the validation (through the isolobal criteria) of the (theoretical) results. Obviously (and unavoidably), experiment and technological synthesis is the final test of any theoretical molecular engineering design.

Competing interests

The author declares that he has no competing interests.

Acknowledgements

Dedication: This work is dedicated to the memory of my late wife, Elpiniki Zdetsis.

References

  1. Levy RA: Principles of Solid State Physics. New York: Academic Press; 1968.

  2. Sidgwick NV: The Electronic Theory of Valence. Oxford: Clarendon Press; 1927.

  3. Rodger G: Introduction to Coordination Solid State and Discriptive Organic Chemistry. Berkshire: McGraw-Hill Education, Europe; 2000.

  4. Greenwood NN, Earnshaw A: Chemistry of the Elements. 2nd edition. Oxford: Butterworth-Heinemann; 1997. OpenURL

  5. Peer D, Karp JM, Hong S, Farokhzad OC, Margalit R, Langer R: Nanocarriers as an emerging platform for cancer therapy.

    Nature Nanotech 2007, 2:751. Publisher Full Text OpenURL

  6. Zdetsis AD: High-symmetry high-stability silicon fullerens: a first principles study.

    Phys Rev B 2007, 76:075402. OpenURL

  7. Zdetsis AD: High-symmetry low-energy structures of C60H60 and related fullerenes and nanotubes.

    Phys Rev B 2008, 77:115402. OpenURL

  8. Zdetsis AD: One-nanometer luminous silicon nanoparticles: possibility of a fullerene interpretation.

    Phys Rev B 2009, 79:195437. OpenURL

  9. Zdetsis AD: Stabilization of large silicon fullerenes and related nanostructures through puckering and poly(oligo)merization.

    Phys Rev B 2009, 80:195417. OpenURL

  10. Zdetsis AD: Success and pitfalls of the Sin-2C2H2-C2Bn-2Hn isolobal analogy: depth and breadth of the boron connection.

    J Chem Phys 2009, 130:064303. PubMed Abstract | Publisher Full Text OpenURL

  11. Zdetsis AD: Fluxional and aromatic behavior on small magic silicon clusters: a full an initio study of Sin, Sin, Sin2- and Sin1+, n = 6, 10, clusters.

    J Chem Phys 2007, 127:014314. PubMed Abstract | Publisher Full Text OpenURL

  12. Zdetsis AD: Analogy of silicon clusters with deltahedral boranes: how far can it go? Rexamining the structures of Sin and Sin2-, n = 5, 13, clusters.

    J Chem Phys 2007, 127:244308. PubMed Abstract | Publisher Full Text OpenURL

  13. Zdetsis AD: The boron connection: a parallel description of aromatic, bonding and structural characteristics of hydrogenated silicon-carbon and isovalent carboranes.

    Inorg Chem 2008, 47:8823. PubMed Abstract | Publisher Full Text OpenURL

  14. Zdetsis AD: A new class of silicon-carbon clusters: a full study of the hydrogenated SinC2H2, n = 3, 4, 5 clusters in comparison with their isoelectronic carboranes C2BnHn+2.

    J Chem Phys 2008, 128:184305. PubMed Abstract | Publisher Full Text OpenURL

  15. Zdetsis AD: High-stability hydrogenated silicon-carbon clusters: a full study of Si2C2H2 in comparison to Si2C2B2H4 and other similar species.

    J Phys Chem A 2008, 112:5712. PubMed Abstract | Publisher Full Text OpenURL

  16. Koukaras EN, Zdetsis AD: Multidecker sandwiches of slicon-carbon clusters.

    Organometallics 2009, 28:4308. Publisher Full Text OpenURL

  17. Zdetsis AD: Stabilization of flat aromatic Si6 rings analogous to benzene ab initio theoretical prediction.

    J Chem Phys 2007, 127:214306. PubMed Abstract | Publisher Full Text OpenURL

  18. Zdetsis AD: Similarities and differences between silicon and carbon nanostructures: theoretical predictions.

    AIP Conf Proc 2007, 963:474. OpenURL

  19. Zdetsis AD, Foweler PW, Havenith RWA: Aromaticity of planar Si6 rings in silicon-lithium clusters.

    Mol Phys 2008, 106:1803. Publisher Full Text OpenURL

  20. Jin B, Liu J-Y: Theoretical prediction of stable structures of lithiosilcion based on planar double, triple and quadruple silicon ring.

    Chem Phys Lett 2010, 443:33. OpenURL

  21. Zdetsis AD: Rationalizing and functionalizing stannaspherene: very stable stannaspherene alloys.

    J Chem Phys 2009, 131:224310. PubMed Abstract | Publisher Full Text OpenURL

  22. Zdetsis AD: Silicon-busmuth and germanium-bismuth clusters of high stability.

    J Phys Chem A 2009, 113:12079-12087. PubMed Abstract | Publisher Full Text OpenURL

  23. Zdetsis AD: Theoretical predictions of a new family of stable bismuth and other group 15 fullerenes.

    J Chem Phys C 2010, 114:10775. Publisher Full Text OpenURL

  24. Zdetsis AD: Structural reciprocity effect in binary silicon-bismuth clusters.

    Chem Phys Lett 2010, 493:45. Publisher Full Text OpenURL

  25. Hoffman R: Building Bridges Between Inorganic and Organic Chemistry.

    Angew Chem Int Ed Engl 1982, 21:711. OpenURL

  26. Lipscomb WN: Framework rearrangement in boranes and carboranes.

    Science 1966, 153:373. PubMed Abstract | Publisher Full Text OpenURL

  27. Wade K: The structural significance of the number of skeletal bonding electron-pairs in carboranes, the higher boranes and borane anions, and various transition-metal carbonyl cluster compounds.

    J Chem Soc Chem Commun 1971, 22:792. OpenURL

  28. Fox MA, Wade K: Evolving patterns in boron cluster chemistry.

    Pure Appl Chem 2003, 75:1315. Publisher Full Text OpenURL

  29. Williams RE: Polyborone, carborane, carbocation continuum: architectural patterns.

    Chem Rev 1992, 92:177. Publisher Full Text OpenURL

  30. Stephan M, Müller P, Zenneck U, Pritzkow H, Siebert W, Grimes RN: Organotransition-matall metallacarbones. 37 Paramagnetic iron-cobalt dicobalt triple-decker sandwich compleses.

    Inorg Chem 1995, 34:2058. Publisher Full Text OpenURL

  31. Bluhm M, Pritzkow H, Siebert W, Grimes RN: Benzene-centred tri- and tetramettala carborane sandwich complexes organotransition-metal metalla carboranes, Part 56.

    Angew Chem Int Ed 2000, 39:4562-4564. Publisher Full Text OpenURL

  32. Brook MA: Silicon in Organic, Organometallic and Polymer Chemistry. New York: John Wiley & Sons; 2000.

  33. Yang X, Jiang W, Knobler CB, Hawthorne MF: Rigid-rod molecules: carborods. Synthesis of tetrameric p-carboranes and the crystal structure of bis(tr-n-butylsilyl) tetra-p-carborane.

    J Am Chem Soc 1992, 114:9719. Publisher Full Text OpenURL

  34. University of Missouri, Columbia International Institute of Nano and Molecular Medicine [http:/ / nanomed.missouri.edu/ index.php?cat=faculty&groups=instit ute,&person=mfrederickhawthorne&per sonattribute=carborods&] webcite

  35. Canham L, Aston R: Will a chip every day keep the doctor away?

    Physics world 2001, 14(7):27-31. OpenURL

  36. Park Ji-Ho, Gu L, von Maltzahn G, Ruoslahti E, Bhatia SN, Sailor MJ: Biodegradable luminescent porous silicon nanoparticles in vivo for applications.

    Nature Materials 2009, 8:331. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  37. Wang Z-X, Schleyer PvR: Planar hypercoordinate carbons joined: wheel-shaped molecules with CC axles.

    Angew Chem Int Ed 2002, 4082:41. OpenURL

  38. Zdetsis AD: Novel pentagonal silicon rings and nanowheels stabilized by flat pentacoordinate carbon(s).

    J Chem Phys 2011, 134:094312. PubMed Abstract | Publisher Full Text OpenURL

  39. Cui LF, Huang X, Wang LM, Zubarev DY, Boldyrev AI, Li J, Wang LS: Sn122-: stannaspherene.

    J Am Chem Soc 2006, 128:8390. PubMed Abstract | Publisher Full Text OpenURL

  40. Zdetsis AD: Silicon fullerenes. In Handbook of Nanophysics. Volume 2 Ch 48. Edited by Slatter Klaus D. London: Taylor and Francis; 2010. OpenURL

  41. Koukaras EN, Katsougrakis NP, Kourelis TG, Nikiforides G, Zdetsis S, Zdetsis AD: Investigating theoretically designed functionalizable silicon-carbon nanoparticles and nanorods as possible radiolabelling and drug delivery agents for cancer diagnostics and therapy.

    Int Conf Computational Methods in Science and Engineering. ICCMSE-2010. Kos Island, Greece 2011.

    (to appear in American Physical Society Proceedings Series, 2011)

    OpenURL

  42. Wolfe-Simon F, Blum JS, Kulp TR, Gordon GW, Hoeft SE, Pett-Ridge J, Stolz JF, Webb SM, Weber PK, Davies PCW, Anbar AD, Oremland RS: A Bacterium That Can Grow by Using Arsenic Instead of Phosphorus. [http://www.sciencexpress.org] webcite

    2010, 1.