SpringerOpen Newsletter

Receive periodic news and updates relating to SpringerOpen.

Open Access Highly Accessed Nano Express

Simple two-step fabrication method of Bi2Te3 nanowires

Joohoon Kang, Jin-Seo Noh and Wooyoung Lee*

Author Affiliations

Department of Materials Science and Engineering, Yonsei University, 262 Seongsanno, Seodaemun-gu, Seoul 120-749, Korea

For all author emails, please log on.

Nanoscale Research Letters 2011, 6:277  doi:10.1186/1556-276X-6-277


The electronic version of this article is the complete one and can be found online at: http://www.nanoscalereslett.com/content/6/1/277


Received:1 November 2010
Accepted:4 April 2011
Published:4 April 2011

© 2011 Kang et al; licensee Springer.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Bismuth telluride (Bi2Te3) is an attractive material for both thermoelectric and topological insulator applications. Its performance is expected to be greatly improved when the material takes nanowire structures. However, it is very difficult to grow high-quality Bi2Te3 nanowires. In this study, a simple and reliable method for the growth of Bi2Te3 nanowires is reported, which uses post-sputtering and annealing in combination with the conventional method involving on-film formation of nanowires. Transmission electron microscopy study shows that Bi2Te3 nanowires grown by our technique are highly single-crystalline and oriented along [110] direction.

Introduction

Low-dimensional nanostructures have received great attention due to their unique and unusual properties in many research fields related to nanoscience and nanotechnology [1]. One of the low-dimensional nanostructures, namely the one-dimensional (1D) nanowire, has a high aspect-ratio, making it suitable for future electronic and thermoelectric devices and new types of sensors [2,3]. In particular, it is believed that the classical size effect and quantum confinement effect in 1D nanowire play a crucial role in enhancing thermoelectric performance [1,4,5]. Bismuth telluride (Bi2Te3) is well known for its high thermoelectric figure-of-merit (ZT ~ 1) in bulk. Moreover, its thermoelectric performance is expected to be remarkably improved for nanowire structures as a consequence of the high thermoelectric power (S2σ) and suppressed thermal conductivity (κ) in the low-dimensional structures [6,7]. More recently, Bi2Te3 has also been intensively investigated for the search of an efficient topological insulator since the observation of the quantum-spin-Hall-like phenomenon on the surface of a material even without the applied magnetic fields. Topological insulator materials show almost dissipationless surface conduction because of the high spin degeneracy caused by the spin--orbit coupling, although they behave like an insulator in bulk. Unlike the bulk Bi2Te3, the existence of the surface states in 1D Bi2Te3 nanowires has been predicted only by theory [8,9]. Since the theoretical expectation, numerous synthesis methods of Bi2Te3 nanowires have been developed over the past several years [10-16]. As part of such efforts, we have already reported the simple Bi2Te3 nanowire growth using a stress-induced method with no catalysts, starting materials, and templates, which is called the on-film formation of nanowires (OFF-ON) [17,18]. However, the one-step compound nanowire growth using this method is hard to establish the optimum conditions because diffusivity difference between multiple components often leads to nanowires grown with compositions different from a nominal stoichiometry in the thermal annealing step. In this article, a more reliable Bi2Te3 nanowire growth method is reported based on the OFF-ON process. Our approach is a two-step OFF-ON process. The first step involves pure Bi nanowire growth by the conventional OFF-ON method [17]. The second step is the in situ deposition of Bi2Te3 thin film onto a substrate including pure Bi nanowires, followed by thermal annealing. Bi2Te3 nanowires are synthesized through the inter-diffusion of constituent elements between the Bi nanowire core and the Bi2Te3 shell during this second step. Here, the reliability of this Bi2Te3 nanowire growth process and the quality of single-crystalline Bi2Te3 nanowires thus grown will be presented.

Experiment

Figure 1 illustrates the schematics of Bi2Te3 nanowires synthesis process based on the OFF-ON method. To synthesize Bi2Te3 nanowires, Bi nanowires are grown by the OFF-ON method in the first step [17]. For Bi nanowire growth, a Bi thin film is first deposited onto a SiO2/Si substrate at a rate of 32.7 Å/s by radio frequency (RF) sputtering under a base pressure of 10-7 Torr. Then, the Bi film on the SiO2/Si substrate is thermally annealed at 250°C for 10 h in an ultrahigh vacuum to grow Bi nanowires. Bi nanowires spontaneously grow to release the compressive stress acting on the Bi film, which is produced by the large thermal expansion coefficient difference between a Bi thin film (13.4 × 10-6/°C) and a SiO2/Si substrate ((0.5 × 10-6/°C)/(2.4 × 10-6/°C)) [17]. After the Bi nanowire growth is completed, a Bi2Te3 thin film is deposited onto the Bi nanowire-including SiO2/Si substrate using in situ RF sputtering under a base pressure of 10-7 Torr. The samples then undergo vacuum annealing at 350°C for 10 h. During this second step, Bi2Te3 nanowires are synthesized, as the component atoms are inter-diffused between the Bi core nanowire and the Bi2Te3 surface layer. Moreover, the excess Bi atoms evaporate due to the high annealing temperature (350°C) well above the melting point of Bi (271.5°C), leaving behind stoichiometric Bi2Te3 nanowires. The probability of Te evaporation is expected to be low, since the annealing temperature (350°C) is significantly lower than the melting points of Te (449.5°C) and Bi2Te3 (585°C). The whole process is very simple, as schematically depicted in Figure 1. To characterize Bi2Te3 nanowires in detail, atomic structure, crystalline quality, and composition are analyzed using high-resolution transmission electron microscopy (HR-TEM).

thumbnailFigure 1. Schematic representation of Bi2Te3 nanowire synthesis method. Step 1: Bi nanowires are grown on the oxidized Si substrate by the OFF-ON method. Step 2: Bi2Te3 is deposited onto the substrate containing the Bi nanowires by in situ RF sputtering, which forms Bi-Bi2Te3 core/shell nanowires. Homogeneous Bi2Te3 nanowires are synthesized during the vacuum annealing at 350°C.

Results and discussion

TEM analyses of Bi2Te3 nanowires grown by the two-step process were performed. Bi2Te3 nanowires have a cylindrical shape, several tens of nanometers in diameter and several hundreds of micrometers in length. Figure 2 exhibits representative TEM images of a Bi2Te3 nanowire with a diameter of approximately 80 nm. From the selected area electron diffraction (SAED) pattern in the direction perpendicular to the longitudinal axis of the nanowire, it can be recognized that the Bi2Te3 nanowire is highly single-crystalline and its growth direction is [110]. A HR-TEM image confirms that the Bi2Te3 nanowire is oriented to [110] the direction with single-crystalline and defect-free atomic arrangements.

thumbnailFigure 2. A low-magnification TEM image shows an individual Bi2Te3 nanowire with a diameter of 78 nm. A SAED pattern reveals that the Bi2Te3 nanowire is grown in [110] direction with high single-crystallinity. A high-resolution TEM image also indicates highly single-crystalline atomic arrangements without any defects.

To confirm the chemical composition of the Bi2Te3 nanowires, scanning TEM (STEM) and energy dispersive X-ray spectroscopy (EDS) were utilized. Figure 3a is a high-angle angular dark field (HAADF) STEM image of a Bi2Te3 nanowire with a diameter of 78 nm. The EDS line scan profiles show the uniform atomic distribution of Bi and Te elements through the whole nanowire, as displayed in Figure 3b. More importantly, the atomic ratios of Bi and Te are analyzed to be 39 ± 1 and 61 ± 1%, respectively. This reveals that the nanowire is composed of the thermodynamically stable, stoichiometric Bi2Te3 phase within the measurement error of STEM. The composition of Bi:Te = 2:3 is further confirmed by STEM elemental mappings across the same nanowire (see Figure 3c, d).

thumbnailFigure 3. Composition analysis of a Bi2Te3 nanowire. (a) A HAADF image of the Bi2Te3 nanowire. (b) EDS line scan profiles showing the distributions of Bi (cyan, 39%) and Te (red, 61%) through the nanowire. (c,d) Elemental mapping images show the uniform distributions of Bi (cyan) and Te (red) along the nanowire.

Because our method for Bi2Te3 nanowires synthesis uses heterogeneous nanowire structures consisting of OFF-ON-grown Bi core and post-deposited Bi2Te3 shell, the homogeneity of final nanowires should be verified. The biggest concern may be a residual existence of an interface between the original core and the shell layers. To examine this possibility, cross-sectional TEM measurements of thin slices randomly taken from the nanowires were carried out. For the TEM sampling, dual-beam focused ion beam (FIB) was utilized based on the process depicted in Figure 4. Pt was deposited onto a Bi2Te3 nanowire to prevent any distortion during the dual-beam FIB processes (Figure 4a). Focused gallium (Ga) ion beam or electron beam generated from a fine nozzle makes it possible to deposit or etch a Pt film area selectively on the substrate. The Ga ion beam dissociates injected Pt-precursor molecules and removes the ligands from them on the selective area, resulting in local deposition of the Pt film. This is the well-known technique for TEM sampling [19]. Then, the Omni-probe of the dual-beam FIB tool took the etched TEM sample with a thickness of below 100 nm away from the SiO2/Si substrate. The final sample for TEM measurement is shown in Figure 4b. Figure 4c is the cross-sectional TEM image of a Bi2Te3 nanowire. From a HR-TEM image and SAED pattern of the part where a Bi core-Bi2Te3 shell interface was originally located, it is found that the synthesized Bi2Te3 nanowire has no interface inside and is crystalline across the cross section. These results indicate that the inter-diffusion of component atoms actively occurs between the Bi core and the Bi2Te3 shell during a 10-h annealing at the elevated temperature, with evaporation of excess Bi atoms at the nanowire surface.

thumbnailFigure 4. A cross section of a Bi2Te3 nanowire. (a) Pt is deposited locally to protect Bi2Te3 nanowire during the dual beam FIB process. (b) A SEM image shows the cross section of Bi2Te3 nanowire. (c) A low-magnification TEM image of the cross section of Bi2Te3 nanowire. There is no interface between the original Bi core and the Bi2Te3 shell after annealing. A SAED pattern and a HR-TEM image reveal that Bi2Te3 nanowire is highly single-crystalline across the nanowire.

Conclusions

A simple and new synthesis method of quality single-crystalline Bi2Te3 nanowires combining the OFF-ON method with post-sputtering and annealing is demonstrated. In step one, Bi nanowires are grown by the conventional OFF-ON method. In step two, a Bi2Te3 thin film is in situ deposited onto the Bi nanowire-including substrate by RF sputtering, followed by the post-annealing at a high temperature well above the melting point of Bi. Bi2Te3 nanowires are synthesized during the high-temperature annealing by the atomic inter-diffusion between the Bi core and the Bi2Te3 shell. Indeed, our two-step growth method yielded homogeneous, stoichiometric Bi2Te3 nanowires with high single-crystallinity and no observable defects, which were hard to achieve using the conventional OFF-ON growth from a single compound source. These results are expected to facilitate the studies on high-efficiency thermoelectric devices and topological insulators taking advantage of Bi2Te3 nanowires.

Abbreviations

EDS: energy dispersive X-ray spectroscopy; HAADF: high-angle angular dark field; HR-TEM: high-resolution transmission electron microscopy; OFF-ON: on-film formation of nanowires; RF: radio frequency; SAED: selected area electron diffraction; STEM: scanning TEM.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

J.K carried out this nanowire growth experiment and character analysis and drafted the manuscript. J-S.N participated in the design of the experiment and revised the manuscript. These whole experiment, analysis, and manuscript are totally directed by Prof. W.L. All authors read and approved the final manuscript.

Acknowledgements

This study was supported by the Priority Research Centers Program (2009-0093823) through the National Research Foundation of Korea (NRF), a grant from the "Center for Nanostructured Materials Technology," under the "21st Century Frontier R&D Programs" of the Ministry of Education, Science, and by the Pioneer Research Center Program (2010-0019313) through the National Research Foundation of Korea funded by the Ministry of Education, Science and Technology.

References

  1. Holmes J, Johnston K, Doty R, Korgel B: Control of thickness and orientation of solution-grown Silicon nanowires.

    Science 2000, 287:1471-1473. PubMed Abstract | Publisher Full Text OpenURL

  2. Wang J: Nanomaterial-based electrochemical biosensors.

    Analyst 2005, 130:421-426. PubMed Abstract | Publisher Full Text OpenURL

  3. Ng H, Li J, Smith M, Nguyen P, Cassell A, Han J, Meyyappan M: Growth of epitaxial nanowires at the junctions of nanowalls.

    Science 2003, 300:1249. PubMed Abstract | Publisher Full Text OpenURL

  4. Hicks L, Dresselhaus M: Thermoelectric figure of merit of a one-dimensional semiconductor.

    Phys Rev B 1993, 47:16631-16634. Publisher Full Text OpenURL

  5. Dresselhaus M, Dresselhaus G, Sun X, Zhang Z, Cronin SB, Koga T: Low dimensional thermoelectric materials.

    Phys Solid State 1999, 41:679-682. Publisher Full Text OpenURL

  6. Dresselhaus M, Dresselhaus G, Sun X, Zhang Z, Cronin SB, Koga T, Ying JY, Chen G: The promise of low-dimensional thermoelectric materials.

    Microscale Thermophys Eng 1999, 3:89-100. Publisher Full Text OpenURL

  7. Rowe D: Thermoelectrics Handbook: Macro to Nano. New York: Taylor & Francis; 2006. OpenURL

  8. Zhang H, Liu C, Qi X, Dai X, Fang Z, Zhang S: Topological insulators in Bi2Se3, Bi2Te3, and Sb2Te3 with a single Dirac cone on the surface.

    Nat Phys 2009, 5:438. Publisher Full Text OpenURL

  9. Moore J: Topological insulators: The next generation.

    Nat Phys 2009, 5:378. Publisher Full Text OpenURL

  10. Prieto A, Sander M, Gonzalez M, Gronsky R, Sands T, Stacy A: The electrodeposition of high-density, ordered arrays of Bi1-xSbx nanowires.

    J Am Chem Soc 2001, 123:7160-7161. PubMed Abstract | Publisher Full Text OpenURL

  11. Trahey L, Becker C, Stacy A: Electrodeposited Bismuth Telluride nanowire arryas with uniform growth fronts.

    Nano Lett 2007, 7:2535-2539. PubMed Abstract | Publisher Full Text OpenURL

  12. Wang W, Wan C, Wang Y: Investigation of electrodeposition of Bi2Te3 nanowires into nanoporous alumina templates with a rotating electrode.

    J Phys Chem B 2006, 110:12974-12980. PubMed Abstract | Publisher Full Text OpenURL

  13. Gonzalez M, Snyder G, Prieto A, Gronsky R, Sands T, Stacy A: Direct electrodeposition of highly dense 50 nm Bi2Te3-ySey nanowire arrays.

    Nano Lett 2003, 3:973-977. Publisher Full Text OpenURL

  14. Gonzalez M, Prieto A, Gronsky R, Sands T, Stacy A: Insights into the electrodeposition mechanisms of Bi2Te3.

    J Electrochem Soc 2002, 149:C546-C554. Publisher Full Text OpenURL

  15. Menke E, Li Q, Penner R: Bismuth Telluride nanowires synthesized by cyclic electrodeposition/stripping coupled with step edge decoration.

    Nano Lett 2004, 4:2009-2014. Publisher Full Text OpenURL

  16. Cronin SB, Lin YM, Koga T, Sun X, Ying JY, Dresselhaus MS: Thermoelectric investigation of bismuth nanowires.

    International Conference on Thermoelectrics 1999, 554-557. OpenURL

  17. Shim W, Ham J, Lee K, Jeung W, Johnson M, Lee W: On-film formation of Bi nanowires with extraordinary electron mobility.

    Nano Lett 2009, 9:18-22. PubMed Abstract | Publisher Full Text OpenURL

  18. Ham J, Shim W, Kim D, Lee S, Roh J, Sohn S, Oh K, Voorhees P, Lee W: Direct growth of compound semiconductor nanowires by on-film formation of nanowires: Bismuth telluride.

    Nano Lett 2009, 9:2867. PubMed Abstract | Publisher Full Text OpenURL

  19. Giannuzzi LA, Stevens FA: Introduction to Focused Ion Beams: Instrumentation, Theory, Techniques and Practice.

    Springer Press 2004. OpenURL