Abstract
The assessment of proposed origins for thermal conductivity enhancement in nanofluids signifies the importance of particle morphology and coupled transport in determining nanofluid heat conduction and thermal conductivity. The success of developing nanofluids of superior conductivity depends thus very much on our understanding and manipulation of the morphology and the coupled transport. Nanofluids with conductivity of upper HashinShtrikman (HS) bound can be obtained by manipulating particles into an interconnected configuration that disperses the base fluid and thus significantly enhancing the particlefluid interfacial energy transport. Nanofluids with conductivity higher than the upper HS bound could also be developed by manipulating the coupled transport among various transport processes, and thus the nature of heat conduction in nanofluids. While the direct contributions of ordered liquid layer and particle Brownian motion to the nanofluid conductivity are negligible, their indirect effects can be significant via their influence on the particle morphology and/or the coupled transport.
Introduction
Nanofluids are a new class of fluids engineered by dispersing nanometersize structures (particles, fibers, tubes, droplets, etc.) in base fluids. The very essence of nanofluids research and development is to enhance fluid macroscopic and systemscale properties through manipulating microscopic physics (structures, properties, and activities) [1,2]. One of such properties is the thermal conductivity that characterizes the strength of heat conduction and has become a research focus of nanofluid society in the last decade [19].
The importance of highconductivity nanofluids cannot be overemphasized. The success of effectively developing such nanofluids depends very much on our understanding of mechanism responsible for the significant enhancement of thermal conductivity. Both static and dynamic reasons have been proposed for experimental finding of significant conductivity enhancement [19]. The former includes the nanoparticle morphology [10,11] and the liquid layering at the liquidparticle interface [1217]. The latter contains the coupled (cross) transport [1820] and the nanoparticle Brownian motion [2126]. Here, the effect of particle morphology contains those from the particle shape, connectivity among particles (including and generalizing the nanoparticle clustering/aggregating in the literature [10,11]), and particle distribution in nanofluids. This short review aims for a concise assessment of these contributions, thus identifying the future research needs toward nanofluids of high thermal conductivity. The readers are referred to, for example, [19] for stateoftheart expositions of major advances on the synthesis, characterization, and application of nanofluids.
Static mechanisms
Morphology
The nanoparticle morphology in nanofluids can vary from a welldispersed configuration in base fluids to a continuous phase of interconnected configuration. Such a morphology variation will change nanofluid's effective thermal conductivity significantly [2732], a phenomenon credited to the particle clustering/aggregating in the literature [19]. This appears obvious because the nanofluid's effective conductivity stems mainly from the contribution of continuous phase that constitutes the continuous path for thermal flow [27,28]. Although particle clustering/aggregating offers a way of changing particle morphology, it is not necessarily an effective means. The research should thus focus not only on the clustering/aggregating, but also on the general ways of varying morphology.
Given that nanofluid thermal conductivity depends heavily on the particle morphology, its lower and upper bounds can be completely determined by the volume fractions and conductivities of the two phases. These bounds have been well developed based on the classical effectivemedium theory and termed as the HashinShtrikman (HS) bounds [33],
Here k_{p}, k_{f}, and k_{e }are the conductivities of particle, base fluid, and nanofluid, respectively, and φ is the particle volume fraction. For the case of k_{p}/k_{f }≥1, Equations (1) and (2) give the lower and the upper bounds for nanofluid effective thermal conductivity, corresponding to the two limiting morphologies where the liquid serves as the continuous phase for the lower bound and the particle disperses the liquid for the upper bound, respectively. When k_{p}/k_{f }≤1, their roles are interchanged, so that Equations (1) and (2) provide the upper and the lower bounds, respectively. Therefore, the upper bound always takes a configuration (morphology) where the continuous phase is made of the higherconductivity material.
The morphology dependence of nanofluid's conductivity has been recently examined in detail by either of the two approaches: the constructal approach [1,2,2932] and the scalingup by the volume average [1,2,27,28]. Such studies not only confirm the features captured in the HS bounds but also uncover the microscopic mechanism responsible for the morphology dependence of nanofluid's conductivity. As higherconductivity particles interconnect each other and disperse the lowerconductivity base fluid into a dispersed phase, the interfacial energy transport between particle and base fluid becomes enhanced significantly such that the nanofluid's conductivity takes its value of upper HS bound (Fan J and Wang LQ: Heat conduction in nanofluids: structureproperty correlation, submitted).
Figures 1 and 2 compare the experimental data of nanofluid thermal conductivity [11,20,3463] with the HS bounds [33]. For a concise comparison in Figure 1, the HS bounds (Equations 1 and 2) are rewritten in the form of
Figure 1. Comparison of experimental data with HS bounds.
Figure 2. Comparison of effective thermal conductivity between experimental data and HS bounds.
and
where
As k_{p}/k_{f }moves away from the unity along both directions, the separation between the upper and lower HS bounds becomes pronounced (Figures 1 and 2) so that the room for manipulating nanofluid conductivity via changing the particle morphology becomes more spacious. The HS bounds are respected by some nanofluids for which their thermal conductivity is strongly dependent on particle morphology, such as whether nanoparticles stay welldispersed in the base fluid, form aggregates, or assume a configuration of continuous phase that disperses the fluid into a dispersed phase (Figure 1). There are thermal conductivity data that fall outside the HS bounds (Figures 1 and 2).
Ordered liquid layer
Both experimental and theoretical evidences have been reported of the presence of ordered liquid layer near a solid surface by which the atomic structure of the liquid layer is significantly more ordered than that of bulk liquid [6467]. For example, two layers of icelike structures are experimentally observed to be strongly bounded to the crystal surface on a crystalwater interface, followed by two diffusive layers with less significant ordering [65]. Three ordered water layers have also been observed numerically on the Pt (111) surface [64].
The study is very limited regarding why and how these ordered liquid layers are formed. There is also a lack of detailed examination of properties of these layers, such as their thermal conductivity and thickness. Since ordered crystalline solids have normally much higher thermal conductivity than liquids, the thermal conductivity of such liquid layers is believed to be better than that of bulk liquid. The thickness h of such liquid layers around the solid surface can be estimated by [17]
where N_{a }is the Avogadro's number, and ρ_{f }and M_{f }are the density and the molecular weight of base fluids, respectively. The liquid layer thickness is thus 0.28 nm for waterbased nanofluids, which agrees with that from experiments and molecular dynamic simulation on the order of magnitude.
The presence of liquid layers could thus upgrade the nanofluid effective thermal conductivity via augmenting the particle effective volume fraction. For an estimation of an upper limit for this effect, assume that the thickness and the conductivity of the liquid layer are 0.5 nm and the same as that of the solid particle, respectively. For spherical particles of diameter d_{p}, Equation (1) offers the conductivity ratio with and without this effect:
where η = (k_{p } k_{f})/(k_{p }+ 2k_{f}). The variation of (k_{e})_{with}/(k_{e})_{without }with ηφ and d_{p}/2h is illustrated in Figure 3, showing that the liquidlayering effect is important only when ηφ is large and d_{p}/2h is small. This is normally not the case for practical nanofluids. For Cuinwater nanofluids (η ≈ 1), for example, (k_{e})_{with}/(k_{e})_{without }≈ 1.005 with φ = 0.5% and d_{p }= 10 nm.
Figure 3. Variations of (k_{e})_{with}/(k_{e})_{without }with ηφ and d_{P}/(2h).
Although the liquid layers offer insignificant conductivity enhancement through augmenting the particle volume fraction, their presence do facilitate the formation of particle network by relaxing the requirement of particle physical contact with each other (Figure 4). This will promote the formation of interconnected particle morphology, and thus upgrade the nanofluid thermal conductivity toward its upper bound through the morphology effect.
Figure 4. Ordered liquid layer in promoting the formation of interconnected particle morphology.
Dynamic mechanisms
Coupled transport
In a nanofluid system, normally, there are two or more transport processes that occur simultaneously. Examples are the heat conduction in dispersed phase, heat conduction in continuous phase, mass transport, and chemical reactions either among the nanoparticles or between the nanoparticles and the base fluid. These processes may couple (interfere) and cause new induced effects of flows occurring without or against its primary thermodynamic driving force, which may be a gradient of temperature, or chemical potential, or reaction affinity. Two classical examples of coupled transport are the Soret effect (also known as thermodiffusion or thermophoresis) in which directed motion of particles or macromolecules is driven by thermal gradient and the Dufour effect that is an induced heat flow caused by the concentration gradient.
While the coupled transport is well recognized to be very important in thermodynamics [68], it has not been well appreciated yet in the nanofluid society. The first attempts of examining the effect of coupled transport on nanofluid heat conduction have been recently made in some studies [1,2,9,18], which are briefly outlined here. With the coupling between the heat conduction in the fluid and particle phases denoted by β and σphases, respectively, the temperature T obeys the following energy equations [1,2]
and
where T is the temperature; subscripts β and σ refer to the β and σphases, respectively. γ_{β }= (1  φ)(ρc)_{β}and γ_{σ }= φ(ρc)_{σ }are the effective thermal capacities of β and σphases, respectively, with ρ and c as the density and the specific heat. φ is the volume fraction of the σphase. h and a_{υ }come from modeling of the interfacial flux and are the film heat transfer coefficient and the interfacial area per unit volume, respectively. k_{ββ }and k_{σσ }are the effective thermal conductivities of the β and σphases, respectively; k_{βσ }and k_{σβ }are the coupling (cross) effective thermal conductivities between the two phases.
Rewriting Equations (8) and (9) in their operator form, we obtain
An uncoupled form can then be obtained by evaluating the operator determinant such that
where the index i can take β or σ. Its explicit form reads, after dividing by ha_{υ}(γ_{β }+ γ_{σ})
where
Equation (12) is not a classical heatconduction equation, but can be regarded as
a dualphaselagging (DPL) heatconduction equation with ((k_{βσ}k_{σβ } k_{ββ}k_{σσ})/(ha_{υ}))Δ^{2}T_{i }as the DPL sourcerelated term
The computations of k_{ββ}, k_{σσ}, k_{βσ}, and k_{σβ }are available in [27,28] for some typical nanofluids. The coupledtransport contribution to the nanofluid thermal conductivity, the term (k_{βσ }+ k_{σβ}), can be as high as 10% of the of the overall thermal conductivity [27,28]. The more striking effect of the coupled transport on nanofluid heat conduction can be found by considering
which is smaller than 1 when
Therefore, by the condition for the existence of thermal waves that requires τ_{T}/τ_{q}<1 [18,70], thermal waves may be present in nanofluid heat conduction.
Note also that, for heat conduction in nanofluids, there is a timedependent source term F(r,t) in the DPL heat conduction (Equations (12) and (13)). Therefore, the resonance can also occur. When k_{βσ }= k_{σβ }= 0 so that τ_{T}/τ_{q }is always larger than 1, thermal waves and resonance would not appear. Therefore, the coupled transport could change the nature of heat conduction in nanofluids from a diffusion process to a wave process, thus having a significant effect on nanofluid heat conduction.
Therefore, the cross coupling between the heat conduction in the fluid and particle manifests itself as thermal waves at the macroscale. Depending on factors such as material properties of nanoparticles and base fluids, nanoparticles' geometrical structure and their distribution in the base fluids, and interfacial properties and dynamic processes on particlefluid interfaces, the crosscouplinginduced thermal waves may either enhance or counteract with the moleculardynamicsdriven heat diffusion. Consequently, the heat conduction may be enhanced or weakened by the presence of nanoparticles. This explains the thermal conductivity data that fall outside the HS bounds (Figures 1 and 2).
If the coupled transport between heat conduction and particle diffusion is considered, then the temperature T and particle volume fraction φ satisfy the following equations of energy and mass conservation:
and
where subscripts m and T stand for mass transport and thermal transport, respectively. D_{σσ }is the effective diffusion coefficient for nanoparticles. k_{βm}, k_{σm}, D_{mβ}, D_{mσ}, and D_{mT }are five transport coefficients for coupled heat and mass transport. By following a similar procedure as that of developing Equation (12), an uncoupled form with u (T_{β}, T_{σ}, or φ) as the sole unknown variable is obtained,
where
This can be regarded as a DPL heatconduction equation regarding Δu with τ_{q}, τ_{T}, and
Brownian motion
In nanofluids, nanoparticles randomly move through liquid and possibly collide. Such a Brownian motion was thus proposed to be one of the possible origins for thermal conductivity enhancement because (i) it enables direct particleparticle transport of heat from one to another, and (ii) it induces surrounding fluid flow and thus socalled microconvection. The ratio of the former contribution to the thermal conductivity (k_{BD}) to the base fluid conductivity (k_{f}) is estimated based on the kinetic theory [75],
where subscripts p and BD stand for the nanoparticle and the Brownian diffusion, respectively; k_{B }is the Boltzmann's constant (1.38065 × 10^{23}J/K); and μ is the fluid viscosity. The kinetic theory also gives an upper limit for the ratio of the latter's contribution to the thermal conductivity (k_{BC}) to the base fluid conductivity (k_{f}) [76],
where subscript BC refers to the Brownianmotioninduced convection, and α_{f }is the thermal diffusivity of the base fluid.
Consider a 1% volume fraction of d_{p }= 10 nm copper nanoparticle in water suspension at T = 300 K. (ρc)_{P }= 8900 kg/m^{3 }× 0.386 kJ/(kg K) = 3435.4 kJ/(m^{3 }K), μ = 0.798 × 10^{3}kg/(ms), k_{f }= 0.615 W/(mK), and α_{f }= 1.478 × 10^{7 }m^{2}/s. These yield k_{BD}/k_{f }= 3.076 × 10^{6 }and k_{BC}/k_{f }= 3.726 × 10^{4}. Therefore, both contributions are negligibly small.
Although the direct contribution of particle Brownian motion to the nanofluid conductivity is negligible, its indirect effect could be significant because it plays an important role in processes of particle aggregating and coupled transport.
Concluding remarks
Under the specified volume fractions and thermal conductivities of the two phases in the colloidal state, the interfacial energy transport between the two phases favors a configuration in which the higherconductivity phase forms a continuous path for thermal flow and disperses the lowerconductivity phase. The effective thermal conductivity is thus bounded by those corresponding to the two limiting morphologies: the welldispersed configuration of the higherconductivity phase in the lowerconductivity phase and the welldispersed configuration of the lowerconductivity phase in the higherconductivity phase, corresponding to the lower and the upper bounds of thermal conductivity, respectively. Without considering the effect of interfacial resistance and cross coupling among various transport processes, the classical effectivemedium theory gives these bounds known as the HS bounds. A wide separation of these two bounds offers spacious room of manipulating nanofluid thermal conductivity via the morphology effect.
In a nanofluid system, there are normally two or more transport processes that occur simultaneously. The cross coupling among these processes causes new induced effects of flows occurring without or against its primary thermodynamic driving force and is capable of changing the nature of heat conduction via inducing thermal waves and resonance. Depending on the microscale physics (factors like material properties of nanoparticles and base fluids, nanoparticles' morphology in the base fluids, and interfacial properties and dynamic processes on particlefluid interfaces), the heat diffusion and thermal waves may either enhance or counteract each other. Consequently, the heat conduction may be enhanced or weakened by the presence of nanoparticles.
The direct contributions of ordered liquid layer and particle Brownian motion to the nanofluid conductivity are negligible. Their influence on the particle morphology and/or the coupled transport could, however, offer a strong indirect effect to the nanofluid conductivity.
Therefore, nanofluids with conductivity of upper HS bound can be obtained by manipulating particles into an interconnected configuration that disperses the base fluid, and thus significantly enhancing the particlefluid interfacial energy transport. Nanofluids with conductivity higher than the upper HS bound could also be developed by manipulating the cross coupling among various transport processes and thus the nature of heat conduction in nanofluids.
Abbreviations
DPL: dualphaselagging; HS: HashinShtrikman.
Competing interests
The authors declare that they have no competing interests.
Authors' contributions
Both authors contributed equally.
Acknowledgements
The financial support from the Research Grants Council of Hong Kong (GRF718009 and GRF717508) is gratefully acknowledged.
References

Wang LQ, Fan J: Nanofluids Research: Key Issues.
Nanoscale Res Lett 2010, 5:1241. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Wang LQ, Quintard M: Nanofluids of the future. In Advances in Transport Phenomena. New York: Springer; 2009:179.
2009
Publisher Full Text 
Choi SUS, Zhang ZG, Keblinski P: Nanofluids. In Encyclopedia of Nanoscience and Nanotechnology. Edited by Nalwa HS. New York: American Scientific Publishers; 2004:757.

Peterson GP, Li CH: Heat and mass transfer in fluids with nanoparticle suspensions.
Adv Heat Transfer 2006, 39:257. Publisher Full Text

Das CH, Choi SUS, Yu W, Pradeep T: Nanofluids: Science and Technology. Hoboken, NJ: John Wiley & Sons, Inc; 2008.

Sobhan CB, Peterson GP: Microscale and Nanoscale Heat Transfer: Fundamentals and Engineering Applications. Boca Raton: CRC Press; 2008.

Choi SUS: Nanofluids: from vision to reality through research.
ASME J Heat Transfer 2009, 131:033106. Publisher Full Text

Fan J, Wang LQ: Review of heat conduction in nanofluids.
ASME J Heat Transfer 2011, 133:040801. Publisher Full Text

Wang LQ, Wei XH: Heat conduction in nanofluids. In Handbook of Nanophysics: Nanoparticles and Quantum Dots. Volume Chapter 33. Edited by Sattler K. Taylor & Francis; 2010::331.

Prasher R, Phelan PE, Bhattacharya P: Effect of aggregation kinetics on the thermal conductivity of nanoscale colloidal solutions (Nanofluids).
Nano Lett 2006, 6:1529. PubMed Abstract  Publisher Full Text

Rusconi R, Rodari E, Piazza R: Optical measurements of the thermal properties of nanofluids.
Appl Phys Lett 2006, 89:261916. Publisher Full Text

Yu W, Choi SUS: The role of interfacial layers in the enhanced thermal conductivity of nanofluids: A renovated HamiltonCrosser model.
J Nanopart Res 2004, 6:355. Publisher Full Text

Xue L, Keblinski P, Phillpot SR, Choi SUS, Eastman JA: Effect of liquid layering at the liquidsolid interface on thermal transport.
Int J Heat Mass Transfer 2004, 47:4277. Publisher Full Text

Xie HQ, Fujii M, Zhang X: Effect of interfacial nanolayer on the effective thermal conductivity of nanoparticlefluid mixture.
Int J Heat Mass Transfer 2005, 48:2926. Publisher Full Text

Ren Y, Xie H, Cai A: Effective thermal conductivity of nanofluids containing spherical nanoparticles.
J Phys D Appl Phys 2005, 38:3958. Publisher Full Text

Leong KC, Yang C, Murshed SMS: A model for the thermal conductivity of nanofluids  the effect of interfacial layer.
J Nanopart Res 2006, 8:245. Publisher Full Text

Wang BX, Zhou LP, Peng XF: A fractal model for predicting the effective thermal conductivity of liquid with suspension of nanoparticles.
Int J Heat Mass Transfer 2003, 46:2665. Publisher Full Text

Wang LQ, Zhou XS, Wei XH: Heat Conduction: Mathematical Models and Analytical Solutions. Heidelberg, Berlin: SpringerVerlag; 2008.

Wang LQ, Xu MT, Wei XH: Multiscale theorems.
Adv Chem Eng 2008, 34:175. Publisher Full Text

Wang L, Wei X: Nanofluids: synthesis, heat conduction, and extension.
ASME J Heat Transfer 2009, 131:033102. Publisher Full Text

Koo J, Kleinstreuer C: A new thermal conductivity model for nanofluids.
J Nanopart Res 2004, 6:577. Publisher Full Text

Jang SP, Choi SUS: Role of Brownian motion in the enhanced thermal conductivity of nanofluids.
Appl Phys Lett 2004, 84:4316. Publisher Full Text

Bhattacharya P, Saha SK, Yadav A, Phelan PE, Prasher RS: Brownian dynamics simulation to determine the effective thermal conductivity of nanofluids.
J Appl Phys 2004, 95:6492. Publisher Full Text

Prasher R, Bhattacharya P, Phelan P: Thermal conductivity of nanoscale colloidal solutions (nanofluids).
Phys Rev Lett 2005, 94:025901. PubMed Abstract  Publisher Full Text

Prasher R, Bhattacharya P, Phelan PE: Brownianmotionbased convectiveconductive model for the effective thermal conductivity of nanofluids.
J Heat Transfer Trans ASME 2006, 128:588. Publisher Full Text

Yu W, Choi SUS: The role of interfacial layers in the enhanced thermal conductivity of nanofluids: A renovated Maxwell model.
J Nanopart Res 2003, 5:167. Publisher Full Text

Fan J, Wang LQ: Effective thermal conductivity of nanofluids: the effects of microstructure.
J Phys D Appl Phys 2010, 43:165501. Publisher Full Text

Fan J, Wang LQ: Microstructural effects on macroscale thermal properties in nanofluids.
NANO 2010, 5:117. Publisher Full Text

Fan J, Wang LQ: Constructal design of nanofluids.
Int J Heat Mass Transfer 2010, 53:4238. Publisher Full Text

Bai C, Wang LQ: Constructal Allocation of Nanoparticles in Nanofluids.
J Heat Transfer Trans ASME 2010, 132:052404. Publisher Full Text

Bai C, Wang LQ: Constructal design of nanofluids for onedimensional steady heat conduction systems.
NANO 2010, 5:39. Publisher Full Text

Hashin Z, Shtrikman S: A variational approach to the theory of the effective magnetic permeability of multiphase materials.
J Appl Phys 1962, 33:3125. Publisher Full Text

Wei XH, Wang LQ: 1+1 > 2: Extraordinary fluid conductivity enhancement.

Kang HU, Kim SH, Oh JM: Estimation of thermal conductivity of nanofluid using experimental effective particle volume.
Exp Heat Transfer 2006, 19:181. Publisher Full Text

Eapen J, Li J, Yip S: Mechanism of thermal transport in dilute nanocolloids.
Phys Rev Lett 2007, 98:028302. PubMed Abstract  Publisher Full Text

Buongiorno J, Venerus DC, Prabhat N, McKrell T, Townsend J, Christianson R, Tolmachev YV, Keblinski P, Hu LW, Alvarado JL, Bang IC, Bishnoi SW, Bonetti M, Botz F, Cecere A, Chang Y, Chen G, Chen HS, Chung SJ, Chyu MK, Das SK, Di Paola R, Ding YL, Dubois F, Dzido G, Eapen J, Escher W, Funfschilling D, Galand Q, Gao JW, Gharagozloo PE, Goodson KE, Gutierrez JG, Hong HP, Horton M, Hwang KS, Iorio CS, Jang SP, Jarzebski AB, Jiang YR, Jin LW, Kabelac S, Kamath A, Kedzierski MA, Kieng LG, Kim C, Kim JH, Kim S, Lee SH, Leong KC, Manna I, Michel B, Ni R, Patel HE, Philip J, Poulikakos D, Reynaud C, Savino R, Singh PK, Song PX, Sundararajan T, Timofeeva E, Tritcak T, Turanov AN, Van Vaerenbergh S, Wen DS, Witharana S, Yang C, Yeh WH, Zhao WH, Zhou SQ: A benchmark study on the thermal conductivity of nanofluids.
J Appl Phys 2009, 106:094312. Publisher Full Text

Williams W, Buongiorno J, Hu LW: Experimental investigation of turbulent convective heat transfer and pressure loss of alumina/water and zirconia/water nanoparticle colloids (nanofluids) in horizontal tubes.
J Heat Transfer Trans ASME 2008, 130:042412. Publisher Full Text

Zhang X, Gu H, Fujii M: Experimental study on the effective thermal conductivity and thermal diffusivity of nanofluids.
Int J Thermophys 2006, 27:569. Publisher Full Text

Zhu HT, Zhang CY, Liu SQ, Tang YM, Yin YS: Effects of nanoparticle clustering and alignment on thermal conductivities of Fe3O4 aqueous nanofluids.
Appl Phys Lett 2006, 89:023123. Publisher Full Text

Shima PD, Philip J, Raj B: Role of microconvection induced by Brownian motion of nanoparticles in the enhanced thermal conductivity of stable nanofluids.
Appl Phys Lett 2009, 94:223101. Publisher Full Text

Murshed SMS, Leong KC, Yang C: Enhanced thermal conductivity of TiO2  water based nanofluids.
Int J Therm Sci 2005, 44:367. Publisher Full Text

Duangthongsuk W, Wongwises S: Measurement of temperaturedependent thermal conductivity and viscosity of TiO2water nanofluids.
Exp Therm Fluid Sci 2009, 33:706. Publisher Full Text

Mintsa HA, Roy G, Nguyen CT, Doucet D: New temperature dependent thermal conductivity data for waterbased nanofluids.
Int J Therm Sci 2009, 48:363. Publisher Full Text

Lee DY, Vafai K: Analytical characterization and conceptual assessment of solid and fluid temperature differentials in porous media.
Int J Heat Mass Transfer 1999, 42:423. Publisher Full Text

Das SK, Putra N, Thiesen P, Roetzel W: Temperature dependence of thermal conductivity enhancement for nanofluids.
ASME J Heat Transfer 2003, 125:567. Publisher Full Text

Li CH, Peterson GP: Experimental investigation of temperature and volume fraction variations on the effective thermal conductivity of nanoparticle suspensions (nanofluids).
J Appl Phys 2006, 99:084314. Publisher Full Text

Zhu HT, Zhang CY, Tang YM, Wang JX: Novel synthesis and thermal conductivity of CuO nanofluid.
J Phys Chem C 2007, 111:1646. Publisher Full Text

Hong JG, Kim SH, Kim DS: Effect of laser irradiation on thermal conductivity of ZnO nanofluids.
J Phys Conf Ser 2007, 59:301. Publisher Full Text

Kim SH, Choi SR, Kim D: Thermal conductivity of metaloxide nanofluids: Particle size dependence and effect of laser irradiation.
J Heat Transfer Trans ASME 2007, 129:298. Publisher Full Text

Wen DS, Ding YL: Experimental investigation into convective heat transfer of nanofluids at the entrance region under laminar flow conditions.
Int J Heat Mass Transfer 2004, 47:5181. Publisher Full Text

Gharagozloo PE, Eaton JK, Goodson KE: Diffusion, aggregation, and the thermal conductivity of nanofluids.
Appl Phys Lett 2008, 93:103110. Publisher Full Text

Moosavi M, Goharshadi EK, Youssefi A: Fabrication, characterization, and measurement of some physicochemical properties of ZnO nanofluids.
Int J Heat Fluid Flow 2010, 31:599. Publisher Full Text

Hong TK, Yang HS, Choi CJ: Study of the enhanced thermal conductivity of Fe nanofluids.
J Appl Phys 2005, 97:064311. Publisher Full Text

Sinha K, Kavlicoglu B, Liu YM, Gordaninejad F, Graeve OA: A comparative study of thermal behavior of iron and copper nanofluids.
J Appl Phys 2009, 106:064307. Publisher Full Text

Murshed SMS, Leong KC, Yang C: Determination of the effective thermal diffusivity of nanofluids by the double hotwire technique.
J Phys D Appl Phys 2006, 39:5316. Publisher Full Text

Eastman JA, Choi SUS, Li S, Yu W, Thompson LJ: Anomalously increased effective thermal conductivities of ethylene glycolbased nanofluids containing copper nanoparticles.
Appl Phys Lett 2001, 78:718. Publisher Full Text

Assael MJ, Metaxa IN, Kakosimos K, Constantinou D: Thermal conductivity of nanofluids  experimental and theoretical.
Int J Thermophys 2006, 27:999. Publisher Full Text

Garg J, Poudel B, Chiesa M, Gordon JB, Ma JJ, Wang JB, Ren ZF, Kang YT, Ohtani H, Nanda J, McKinley GH, Chen G: Enhanced thermal conductivity and viscosity of copper nanoparticles in ethylene glycol nanofluid.
J Appl Phys 2008, 103:074301. Publisher Full Text

Xie H, Lee H, Youn W, Choi M: Nanofluids containing multiwalled carbon nanotubes and their enhanced thermal conductivities.
J Appl Phys 2003, 94:4967. Publisher Full Text

Liu MS, Lin MCC, Huang IT, Wang CC: Enhancement of thermal conductivity with carbon nanotube for nanofluids.
Int Commun Heat Mass Transfer 2005, 32:1202. Publisher Full Text

Choi SUS, Zhang ZG, Yu W, Lockwood FE, Grulke EA: Anomalous thermal conductivity enhancement in nanotube suspensions.
Appl Phys Lett 2001, 79:2252. Publisher Full Text

Xie H, Wang J, Xi T, Liu Y, Ai F: Thermal conductivity enhancement of suspensions containing nanosized alumina particles.
J Appl Phys 2002, 91:4568. Publisher Full Text

Raghavan K, Foster K, Motakabbir K, Berkowitz M: Structure and Dynamics of Water at the Pt(111) Interface  MolecularDynamics Study.
J Chem Phys 1991, 94:2110. Publisher Full Text

Reedijk MF, Arsic J, Hollander FFA, de Vries SA, Vlieg E: Liquid order at the interface of KDP crystals with water: Evidence for icelike layers.
Phys Rev Lett 2003, 90:066103. PubMed Abstract  Publisher Full Text

Mo H, Evmenenko G, Dutta P: Ordering of liquid squalane near a solid surface.
Chem Phys Lett 2005, 415:106. Publisher Full Text

Yu CJ, Richter AG, Kmetko J, Dugan SW, Datta A, Dutta P: Structure of interfacial liquids: Xray scattering studies.
Phys Rev E 2001, 63:021205. Publisher Full Text

Demirel Y: Nonequilibrium Thermodynamics: Transport and Rate Processes in Physical, Chemical and Biological Systems. 2nd edition. Amsterdam: Elsevier; 2007.

Tzou D: Macro to MicroScale Heat Transfer: The Lagging Behavior. Washington, DC: Taylor & Francis; 1997.

Xu MT, Wang LQ: Thermal oscillation and resonance in dualphaselagging heat conduction.
Int J Heat Mass Transfer 2002, 45:1055. Publisher Full Text

Chapman S, Cowling TG: The Mathematical Theory of NonUniform Gases: An Account of the Kinetic Theory of Viscosity, Thermal Conduction and Diffusion in Gases. Cambridge: Cambridge University Press; 1991.

Hanley HJM: Transport Phenomena in Fluids. New York: Marcel Dekker; 1969.

McQuarrie DA: Statistical Mechanics. Sausalito: University Science Books; 2000.

Zwanzig RW: Timecorrelation functions and transport coefficients in statistical mechanics.
Annu Rev Phys Chem 1965, 16:67. Publisher Full Text

Keblinski P, Cahil DG: Comment on "Model for heat conduction in nanofluids.
Phys Rev Lett 2005, 95:209401. PubMed Abstract  Publisher Full Text

Evans W, Fish J, Keblinski P: Role of Brownian motion hydrodynamics on nanofluid thermal conductivity.
Appl Phys Lett 2006, 88:093116. Publisher Full Text